;========================================================================================================================================== ; WBT2HTML v1.30 20030711 (c)20010729.Detlev Dalitz ;========================================================================================================================================== ; User information is placed at end of file. ;------------------------------------------------------------------------------------------------------------------------------------------ IntControl (73, 1, 0, 0, 0) ; Install the errorhandler. iParamError = 0 If Param0 GoSub GetParams Else Goto AskParams EndIf If !iParamError GoSub DefineUDFs GoSub UserConfigurableInit GoSub ProgInit GoSub CollectColors GoSub CollectKeywords GoSub OpenReadSourceFile If UseAutoDelimiter Then GoSub CalculateDelimiters GoSub TagQuote GoSub TagComment GoSub TagOperatorMod GoSub TagOperator GoSub TagBracket GoSub TagSpecial GoSub TagWordNumber GoSub EncodeNamedEntities GoSub ColorizeWord GoSub ColorizeNumber GoSub ColorizeSpecial GoSub ColorizeOperator GoSub ColorizeOperatorMod GoSub ColorizeBracket GoSub ColorizeComment GoSub ColorizeQuote GoSub WriteCloseTargetFile EndIf If IntControl (77, 80, 0, 0, 0) Then Return (iParamError) :CANCEL Exit ;========================================================================================================================================== :DefineUDFs ;------------------------------------------------------------------------------------------------------------------------------------------ If ItemLocate ("udfbytetohex", IntControl (77, 103, 0, 0, 0), @TAB) Then Goto skip_udfbytetohex #DefineFunction udfByteToHex (Byte) Return (StrCat (Num2Char (48 + (Byte >> 4) + (39 * ((Byte >> 4) > 9))), Num2Char (48 + (Byte & 15) + (39 * ((Byte & 15) > 9))))) ; lowercase ; Return (StrCat(Num2Char(48+(Byte>>4)+(7*((Byte>>4)>9))),Num2Char(48+(Byte&15)+(7*((Byte&15)>9))))) ; uppercase #EndFunction :skip_udfbytetohex ;------------------------------------------------------------------------------------------------------------------------------------------ If ItemLocate ("udffilechecksum", IntControl (77, 103, 0, 0, 0), @TAB) Then Goto skip_udffilechecksum #DefineFunction udfFileChecksum (sFilename, iRequest) If (VersionDLL () < "3.8hch") Then Return ("") iBBSize = FileSizeEx (sFilename) If !iBBSize Then Return ("") iRequest = Min (2, Max (0, iRequest)) hBB = BinaryAlloc (iBBSize) BinaryRead (hBB, sFilename) sChecksum = BinaryChecksum (hBB, iRequest) BinaryFree (hBB) Return (sChecksum) #EndFunction :skip_udffilechecksum ;------------------------------------------------------------------------------------------------------------------------------------------ If ItemLocate ("udffilecrc32", IntControl (77, 103, 0, 0, 0), @TAB) Then Goto skip_udffilecrc32 #DefineFunction udfFileCrc32 (sFilename) iBBSize = FileSize (sFilename) If !iBBSize Then Return (0) AddExtender ("wwser34i.dll") hBB = BinaryAlloc (iBBSize) BinaryRead (hBB, sFilename) iChecksum = pCheckBinary (IntControl (42, hBB, 0, 0, 0), BinaryEodGet (hBB) - 1, 32) BinaryFree (hBB) Return (iChecksum) #EndFunction :skip_udffilecrc32 ;------------------------------------------------------------------------------------------------------------------------------------------ If ItemLocate ("udfgettemppath", IntControl (77, 103, 0, 0, 0), @TAB) Then Goto skip_udfgettemppath #DefineFunction udfGetTempPath () ftemp = FileCreateTemp ("TMP") FileDelete (ftemp) TempPath = FilePath (ftemp) Terminate (!DirMake (TempPath), "udfGetTempPath", StrCat ("Cannot access temporary folder:", @LF, TempPath)) Return (TempPath) #EndFunction :skip_udfgettemppath ;------------------------------------------------------------------------------------------------------------------------------------------ If ItemLocate ("udfgetlongpathnamea", IntControl (77, 103, 0, 0, 0), @TAB) Then Goto skip_udfgetlongpathnamea #DefineFunction udfGetLongPathNameA (sPath) iMAX_PATH = 260 hBB = BinaryAlloc (iMAX_PATH) BinaryEodSet (hBB, iMAX_PATH) iLength = DllCall (StrCat (DirWindows (1), "kernel32.dll"), long : "GetLongPathNameA", lpstr : sPath, lpbinary : hBB, long : iMAX_PATH) sLongPathName = BinaryPeekStr (hBB, 0, iLength) BinaryFree (hBB) Return (sLongPathName) #EndFunction :skip_udfgetlongpathnamea ;------------------------------------------------------------------------------------------------------------------------------------------ If ItemLocate ("udsdisplaymsg", IntControl (77, 103, 0, 0, 0), @TAB) Then Goto skip_udsdisplaymsg #DefineSubRoutine udsDisplayMsg (sMsgText) If (RtStatus () == 10) Then wStatusMsg (StrCat (sProgLogo, sMsgText)) Else BoxText (StrCat (sProgLogo, sMsgText)) sMsgText = "" #EndSubRoutine :skip_udsdisplaymsg ;------------------------------------------------------------------------------------------------------------------------------------------ If ItemLocate ("udfitemlisttofile", IntControl (77, 103, 0, 0, 0), @TAB) Then Goto skip_udfitemlisttofile #DefineFunction udfItemListToFile (list, delimiter, filename) If (list == "") Then Return (0) list = StrReplace (list, delimiter, @CRLF) hBB = BinaryAlloc (StrLen (list)) BinaryPokeStr (hBB, 0, list) num = BinaryWrite (hBB, filename) BinaryFree (hBB) Return (num) #EndFunction :skip_udfitemlisttofile ;------------------------------------------------------------------------------------------------------------------------------------------ If ItemLocate ("udfisprimenumber", IntControl (77, 103, 0, 0, 0), @TAB) Then Goto skip_udfisprimenumber #DefineFunction udfIsPrimeNumber (iNumber) iLimit = Int (Sqrt (iNumber)) iIsPrime = 1 For i = 2 To iLimit iIsPrime = iNumber mod i If !iIsPrime Then Break Next Return (iIsPrime) #EndFunction :skip_udfisprimenumber ;------------------------------------------------------------------------------------------------------------------------------------------ If ItemLocate ("udfgetprimethisornext", IntControl (77, 103, 0, 0, 0), @TAB) Then Goto skip_udfgetprimethisornext #DefineFunction udfGetPrimeThisOrNext (iNumber) While !udfIsPrimeNumber (iNumber) iNumber = iNumber + 1 EndWhile Return (iNumber) #EndFunction :skip_udfgetprimethisornext ;------------------------------------------------------------------------------------------------------------------------------------------ Return ; from DefineUDFs ;========================================================================================================================================== ;========================================================================================================================================== ;Procedures ;========================================================================================================================================== :WBERRORHANDLER wbError = LastError () wbTextcode = wbError If wbError == 1668 || wbError == 2669 || wbError == 3670 ; 1668 ; "Minor user-defined error" ; 2669 ; "Moderate user-defined error" ; 3670 ; "Severe user-defined error" wbError = ItemExtract (1, IntControl (34, -1, 0, 0, 0), ":") wbTextcode = -1 EndIf wbErrorMsg = "" wbErrorMsg = StrCat (wbErrorMsg, "LastError value:", @LF, wbError, @LF, @LF) wbErrorMsg = StrCat (wbErrorMsg, "LastError string:", @LF, IntControl (34, wbTextcode, 0, 0, 0), @LF, @LF) ; Line in script that caused Error. wbErrorMsg = StrCat (wbErrorMsg, "wbErrorHandlerLine:", @LF, wbErrorHandlerLine, @LF, @LF) ; Offset into script of error line, in bytes. wbErrorMsg = StrCat (wbErrorMsg, "wbErrorHandlerOffset:", @LF, wbErrorHandlerOffset, @LF, @LF) ; Variable being assigned on error line, or "" if none. wbErrorMsg = StrCat (wbErrorMsg, "wbErrorHandlerAssignment:", @LF, wbErrorHandlerAssignment, @LF, @LF) If (wbErrorhandlerassignment > "") Then %wbErrorhandlerassignment% = "eeek" Message ("wbErrorHandler", wbErrorMsg) Exit ;========================================================================================================================================== ;========================================================================================================================================== :CollectColors ; Collect names and rgb color values. sMsg = "Collecting colors ..." udsDisplayMsg (sMsg) ; We use the default rgb color values as defined in WSINIT.DLL and try to update them from the Current User Registry. sColorNameList = StrCat ("Keyword", @TAB, "Quote", @TAB, "Comment", @TAB, "Default Text", @TAB, "Background") sColorValueList = StrCat ("0,0,255", @TAB, "255,0,0", @TAB, "0,128,0", @TAB, "0,0,0", @TAB, "255,255,255") ;--- Read colors for WIL files from WinBatch Studio Registry. ----------------------------------------------------------------------------- sRegKeySub = "Software\Wilson WindowWare\WinBatch Studio\Settings\File types\WIL Files" If RegExistKey (@REGCURRENT, sRegKeySub) hRegKey = RegOpenKeyEx (@REGCURRENT, sRegKeySub, 1, "", "") ; Mode=1=KEY_QUERY_VALUE=Permission to query subkey data ; We only need read access. iColorCount = ItemCount (sColorNameList, @TAB) For iColor = 1 To iColorCount sColorNameItem = ItemExtract (iColor, sColorNameList, @TAB) sRegKeySub = StrCat ("[", sColorNameItem, "]") If RegExistValue (hRegKey, sRegKeySub) sColorValueItem = RegQueryValue (hRegKey, sRegKeySub) sColorValueList = ItemReplace (sColorValueItem, iColor, sColorValueList, @TAB) EndIf Next RegCloseKey (hRegKey) Drop (hRegKey, iColor, iColorCount, sColorNameItem, sColorValueItem) EndIf Drop (sRegKeySub) ;--- Additional colors from my own inspiration. ------------------------------------------------------------------------------------------- ; Note: Force creating new HashTable if colors have changed. sColorNameList = ItemInsert ("Operator", -1, sColorNameList, @TAB) sColorValueList = ItemInsert ("000,048,128", -1, sColorValueList, @TAB) sColorNameList = ItemInsert ("Bracket", -1, sColorNameList, @TAB) sColorValueList = ItemInsert ("032,032,032", -1, sColorValueList, @TAB) sColorNameList = ItemInsert ("Number", -1, sColorNameList, @TAB) sColorValueList = ItemInsert ("096,000,000", -1, sColorValueList, @TAB) sColorNameList = ItemInsert ("Special", -1, sColorNameList, @TAB) sColorValueList = ItemInsert ("000,032,128", -1, sColorValueList, @TAB) ;--- Additional colors from WIL.CLR inifile. ---------------------------------------------------------------------------------------------- ; for example: CON=128,0,128; EXT=255,0,255; CONSTANT=0,128,255; WED=0,128,0; UDF=128,096,048; OPERATOR=0,48,128 sFilenameWilClr = StrCat (DirHome (), "WIL.CLR") sColorList = IniItemizePvt ("COLORS", sFilenameWilClr) iColorCount = ItemCount (sColorList, @TAB) For iColor = 1 To iColorCount sColorNameItem = ItemExtract (iColor, sColorList, @TAB) sColorValueItem = IniReadPvt ("COLORS", sColorNameItem, "000,000,000", sFilenameWilClr) sColorValueList = ItemInsert (sColorValueItem, -1, sColorValueList, @TAB) sColorNameList = ItemInsert (sColorNameItem, -1, sColorNameList, @TAB) Next Drop (iColorCount, sFilenameWilClr, sColorList, sColorNameItem, sColorValueItem, iColor) ;------------------------------------------------------------------------------------------------------------------------------------------ ; Set all items to lower case. ; This is used later when comparing with lowercase keywords in hashbuffer. sColorNameList = StrLower (sColorNameList) ; Delete duplicate names. sNameTrimList = "" sValueTrimList = "" iCount = ItemCount (sColorNameList, @TAB) For iColor = 1 To iCount sNameItem = ItemExtract (iColor, sColorNameList, @TAB) If (sNameItem > "") If !ItemLocate (sNameItem, sNameTrimList, @TAB) sNameTrimList = ItemInsert (sNameItem, -1, sNameTrimList, @TAB) sValueItem = ItemExtract (iColor, sColorValueList, @TAB) sValueTrimList = ItemInsert (sValueItem, -1, sValueTrimList, @TAB) EndIf EndIf Next sColorNameList = sNameTrimList sColorValueList = sValueTrimList Drop (iColor, iCount, sNameItem, sNameTrimList, sValueItem, sValueTrimList) ;------------------------------------------------------------------------------------------------------------------------------------------ If UseRGB ; delete all leading zeroes sColorValueList = ItemInsert ("", 0, sColorValueList, @TAB) sColorValueList = StrReplace (sColorValueList, @TAB, StrCat (",", @TAB, ",")) sColorValueList = StrReplace (sColorValueList, ",0", ",") sColorValueList = StrReplace (sColorValueList, ",0", ",") sColorValueList = StrReplace (sColorValueList, ",,", ",0,") sColorValueList = StrReplace (sColorValueList, ",,", ",0,") sColorValueList = StrReplace (sColorValueList, StrCat (",", @TAB, ","), @TAB) sColorValueList = ItemRemove (1, sColorValueList, @TAB) Else ; convert rgb to hex iColorCount = ItemCount (sColorValueList, @TAB) For iColor = 1 To iColorCount sRgbItem = ItemExtract (iColor, sColorValueList, @TAB) sColorValueItem = StrCat ("#", udfByteToHex (ItemExtract (1, sRgbItem, ","))) sColorValueItem = StrCat (sColorValueItem, udfByteToHex (ItemExtract (2, sRgbItem, ","))) sColorValueItem = StrCat (sColorValueItem, udfByteToHex (ItemExtract (3, sRgbItem, ","))) sColorValueList = ItemReplace (sColorValueItem, iColor, sColorValueList, @TAB) Next EndIf Drop (iColorCount, sColorValueItem, iColor, sRgbItem) Return ;========================================================================================================================================== :CollectKeywords sMsg = "Collecting Keywords ..." udsDisplayMsg (sMsg) ; Read my inifile in WinBatch system folder. sFilenameW2HIni = StrCat (DirHome (), "wbt2html.ini") If !FileExist (sFilenameW2HIni) Then Goto LabelCreateHashTable If (IniReadPvt ("WBT2HTML", "FileVersion", "", sFilenameW2HIni) <> sProgVersion) Then Goto LabelCreateHashTable sFilenameWilClr = IniReadPvt ("WIL", "ColorName", "", sFilenameW2HIni) If (sFilenameWilClr == "") Then Goto LabelCreateHashTable If !FileExist (sFilenameWilClr) Then Goto LabelCreateHashTable If (VersionDLL () < "3.8hch") ; "2002h"="3.8hch" If (IniReadPvt ("WIL", "ColorCRC", "", sFilenameW2HIni) <> udfFileCrc32 (sFilenameWilClr)) Then Goto LabelCreateHashTable Else If (IniReadPvt ("WIL", "ColorMD5", "", sFilenameW2HIni) <> udfFileChecksum (sFilenameWilClr, 0)) Then Goto LabelCreateHashTable EndIf If !FileExist (IniReadPvt ("WIL", "HashName", "", sFilenameW2HIni)) Then Goto LabelCreateHashTable ; Get the HashBuffer filename and other definition values. sMsg = "Reading Keyword HashTable ..." udsDisplayMsg (sMsg) GoSub GetHashBufferDefinition ; Read the HashBuffer. iBBHashSize = FileSizeEx (sFilenameBBHash) If !iBBHashSize Then Goto LabelCreateHashTable hBBHash = BinaryAlloc (iBBHashSize) BinaryRead (hBBHash, sFilenameBBHash) Drop (sFilenameWilClr, iBBHashSize, sFilenameW2HIni) Return ; ......................................................................................................................................... ; Create the Binary Buffer HashTable. :LabelCreateHashTable sMsg = "Creating Keyword HashTable ... be patient ..." udsDisplayMsg (sMsg) CurrentDir = DirGet () DirChange (udfGetTempPath ()) sFilenameBBHash = StrCat (udfGetLongPathNameA (DirGet ()), "wil.hsh") DirChange (DirHome ()) sFilenameWilClr = StrCat (udfGetLongPathNameA (DirGet ()), "wil.clr") DirChange (CurrentDir) Drop (CurrentDir) Terminate (!FileExist (sFilenameWilClr), "Error", "WBT2HTML.WBT needs a good WIL.CLR file with some Keywords in it ...") GoSub InitIni GoSub GetHashBufferDefinition ; Read keywords from WIL.CLR inifile. sKeywordList = IniItemizePvt ("KEYWORDS", sFilenameWilClr) iKeywordCount = ItemCount (sKeywordList, @TAB) ; Create HashTable. ; Calculation rule: HashBufferSize = HashLoadFactor*KeyCount*(Length of Key + Length of Data) with HashLoadFactor=140..200Pct. iLastExclusive = Exclusive (@ON) iBBHashSize = udfGetPrimeThisOrNext (2 * iKeywordCount) * iBBHashRecSize ; Try to make the hash more perfect. hBBHash = BinaryAlloc (iBBHashSize) For i = 1 To iKeywordCount sKeywordItem = ItemExtract (i, sKeywordList, @TAB) sColorNameItem = StrTrim (IniReadPvt ("KEYWORDS", sKeywordItem, "", sFilenameWilClr)) If (sColorNameItem == "1") Then sColorNameItem = "Keyword" ; Set standard WIL color=1 to "Keyword" as set in Registry. iBBHashOffset = BinaryHashRec (hBBHash, iBBHashRecSize, iBBHashKeyOffset, iBBHashKeySize, StrLower (sKeywordItem)) BinaryPokeStr (hBBHash, iBBHashOffset + iBBHashColorNameOffset, StrLower (sColorNameItem)) BinaryPokeStr (hBBHash, iBBHashOffset + iBBHashMixCaseOffset, sKeywordItem) Next BinaryWrite (hBBHash, sFilenameBBHash) Exclusive (iLastExclusive) GoSub WriteIni Drop (sFilenameWilClr, sColorNameItem, iBBHashSize, sFilenameBBHash, iBBHashOffset, i) Drop (iKeywordCount, sKeywordItem, sKeywordList, CurrentDir, sFilenameW2HIni) Return ;------------------------------------------------------------------------------------------------------------------------------------------ :InitIni IniWritePvt ("WBT2HTML", "InternalName", "wbt2html.wbt", sFilenameW2HIni) IniWritePvt ("WBT2HTML", "FileVersion", sProgVersion, sFilenameW2HIni) IniWritePvt ("WBT2HTML", "FileVersionDate", sProgVersionDate, sFilenameW2HIni) IniWritePvt ("WBT2HTML", "FileDescription", "WBT to coloured HTML Script Converter", sFilenameW2HIni) IniWritePvt ("WBT2HTML", "OriginalFilename", "WBT2HTML.WBT", sFilenameW2HIni) IniWritePvt ("WBT2HTML", "ProductName", sProgProduct, sFilenameW2HIni) IniWritePvt ("WBT2HTML", "ProductVersion", "1", sFilenameW2HIni) IniWritePvt ("WBT2HTML", "CompanyName", sProgCompanyName, sFilenameW2HIni) IniWritePvt ("WBT2HTML", "LegalCopyright", sProgCopyright, sFilenameW2HIni) IniWritePvt ("WBT2HTML", "CreationDate", sProgCreationDate, sFilenameW2HIni) IniWritePvt ("WBT2HTML", "Comments", "emailto:dd@dalitz-im-netz.de", sFilenameW2HIni) IniWritePvt ("WBT2HTML", "IniYmdHms", TimeYmdHms (), sFilenameW2HIni) IniWritePvt ("WIL", "ColorName", sFilenameWilClr, sFilenameW2HIni) IniWritePvt ("WIL", "ColorYmdHms", "", sFilenameW2HIni) IniWritePvt ("WIL", "HashName", sFilenameBBHash, sFilenameW2HIni) IniWritePvt ("WIL", "HashYmdHms", "", sFilenameW2HIni) If (VersionDLL () < "3.8hch") ; "2002h"="3.8hch" IniWritePvt ("WIL", "ColorCRC", "", sFilenameW2HIni) IniWritePvt ("WIL", "HashCRC", "", sFilenameW2HIni) Else IniWritePvt ("WIL", "ColorMD5", "", sFilenameW2HIni) IniWritePvt ("WIL", "HashMD5", "", sFilenameW2HIni) EndIf IniWritePvt ("", "", "", sFilenameW2HIni) ; Flush the buffer to disk. Return ;------------------------------------------------------------------------------------------------------------------------------------------ :WriteIni IniWritePvt ("WIL", "ColorName", sFilenameWilClr, sFilenameW2HIni) IniWritePvt ("WIL", "ColorYmdHms", FileTimeGetEx (sFilenameWilClr, 2), sFilenameW2HIni) IniWritePvt ("WIL", "HashName", sFilenameBBHash, sFilenameW2HIni) IniWritePvt ("WIL", "HashYmdHms", FileTimeGetEx (sFilenameBBHash, 2), sFilenameW2HIni) If (VersionDLL () < "3.8hch") ; "2002h"="3.8hch" IniWritePvt ("WIL", "ColorCRC", udfFileCrc32 (sFilenameWilClr), sFilenameW2HIni) IniWritePvt ("WIL", "HashCRC", udfFileCrc32 (sFilenameBBHash), sFilenameW2HIni) Else IniWritePvt ("WIL", "ColorMD5", udfFileChecksum (sFilenameWilClr, 0), sFilenameW2HIni) IniWritePvt ("WIL", "HashMD5", udfFileChecksum (sFilenameBBHash, 0), sFilenameW2HIni) EndIf IniWritePvt ("", "", "", sFilenameW2HIni) ; Flush the buffer to disk. Return ;------------------------------------------------------------------------------------------------------------------------------------------ :GetHashBufferDefinition sFilenameBBHash = IniReadPvt ("WIL", "HashName", "", sFilenameW2HIni) iBBHashKeyOffset = 0 ; Key lowercase. iBBHashKeySize = 260 ; Key lowercase. iBBHashColorNameOffset = 260 ; Color name. iBBHashColorNameSize = 30 ; Color name. iBBHashMixCaseOffset = 290 ; Key content in mixed case as stored in WIL.CLR. iBBHashMixCaseSize = 30 ; Key content in mixed case as stored in WIL.CLR. iBBHashRecSize = iBBHashKeySize + iBBHashColorNameSize + iBBHashMixCaseSize iBBHashRecSize = (1 + (iBBHashRecSize / 16)) * 16 ; Align RecordSize to 16 Byte boundary. Return ; The iBBHashKeySize is sized to 260 chars, regardless of WinBatch's limited var size of 30 chars. ; This is done for runtime security reasons and because of OLE-object names, which are 'oversized' sometimes. ;========================================================================================================================================== :TagQuote sMsg = "Tagging Quotes ..." udsDisplayMsg (sMsg) qlist = """|'|`" ; Three items: doublequote, singlequote, backquote. sCommentChar = ";" sQuoteChars = StrReplace (qlist, "|", "") sScanChars = StrCat (sQuoteChars, sCommentChar) sTagIdent = "q" sTagList%sTagIdent% = sTagOn ; Start list with tag 'sTagOn' to have at least one item in the list.. ; Allocate a separate work line buffer, 4 KB should be enough, otherwise enlarge it to your needs. iBBLineSize = 4096 hBBLine = BinaryAlloc (iBBLineSize) sBBTag = BinaryTagInit (hBB, @LF, @CR) While 1 sBBTag = BinaryTagFind (sBBTag) If (sBBTag == "") Then Break sLine = BinaryTagExtr (sBBTag, 1) If (sLine == "") Then Continue sScanLine = StrClean (sLine, sScanChars, "", @TRUE, 2) If (StrLen (sScanLine) < 2) Then Continue ; Skip line, no complete quoted literal to replace. If (StrSub (sScanLine, 1, 1) == sCommentChar) Then Continue ; Skip line, contains comment only. sScanLineQuoteChars = StrClean (sQuoteChars, sScanLine, "", @TRUE, 2) iQuoteCount = StrLen (sScanLineQuoteChars) For iQuote = 1 To iQuoteCount sQuote = StrSub (sScanLineQuoteChars, iQuote, 1) sBBLineTag%iQuote% = BinaryTagInit (hBBLine, sQuote, sQuote) Next sScanLineQuoteChars = StrCat (sScanLineQuoteChars, sCommentChar) ; Find literals. BinaryEodSet (hBBLine, 0) BinaryPokeStr (hBBLine, 0, sLine) iScan = 1 While 1 sScanLine = BinaryPeekStr (hBBLine, 0, BinaryEodGet (hBBLine)) iScan = StrScan (sScanLine, sScanLineQuoteChars, iScan, @FWDSCAN) If !iScan Then Break sChar = StrSub (sScanLine, iScan, 1) If (sChar == sCommentChar) Then Break iQuote = StrIndex (sScanLineQuoteChars, sChar, 1, @FWDSCAN) sBBLineTag = sBBLineTag%iQuote% sBBLineTag = BinaryTagFind (sBBLineTag) If (sBBLineTag == "") Then Break ; If we break here, then there must be a syntax error in input file. sLiteral = BinaryTagExtr (sBBLineTag, 1) ; Exclude current Quote Char from colorizing. ;;; sLiteral = StrCat(sChar,sLiteral,sChar) ; do not (!) include quote chars for later colorizing !!! iItemLocate = ItemLocate (sLiteral, sTagList%sTagIdent%, @TAB) If !iItemLocate sTagList%sTagIdent% = ItemInsert (sLiteral, -1, sTagList%sTagIdent%, @TAB) sTag = StrCat (sTagOn, sTagIdent, ItemCount (sTagList%sTagIdent%, @TAB), sTagOff) Else sTag = StrCat (sTagOn, sTagIdent, iItemLocate, sTagOff) EndIf sTag = StrCat (sChar, sTag, sChar) ; Exclude current Quote Char from colorizing. sBBLineTag = BinaryTagRepl (sBBLineTag, sTag) sBBLineTag%iQuote% = sBBLineTag iScan = iScan + StrLen (sTag) If UseVerbose sMsgUse = StrCat (sMsg, @LF, "BufferUsage BB ", 100 * BinaryEodGet (hBB) / iBBSize, "%%") sMsgUse = StrCat (sMsgUse, @LF, "BufferUsage BBLine ", 100 * BinaryEodGet (hBBLine) / iBBLineSize, "%%") sMsgUse = StrCat (sMsgUse, @LF, sLiteral) udsDisplayMsg (sMsgUse) EndIf EndWhile ; Replace the line. sLine = BinaryPeekStr (hBBLine, 0, BinaryEodGet (hBBLine)) sTag = StrCat (@LF, sLine, @CR) sBBTag = BinaryTagRepl (sBBTag, sTag) EndWhile BinaryFree (hBBLine) Drop (hBBLine) ; --- debug --- ; num = udfItemListToFile (sTagList%sTagIdent%, @tab, StrCat(udfGetTempPath(),"wbt2html.sTagList.",sTagIdent,".txt")) DropWild ("sBBLineTag*") Drop (iBBLineSize, iItemLocate, iQuote, iQuoteCount, iScan, qlist) Drop (sBBTag, sChar, sCommentChar, sLine, sLiteral, sMsg, sMsgUse) Drop (sQuote, sQuoteChars, sScanChars, sScanLine, sScanLineQuoteChars, sTag, sTagIdent) Return ;========================================================================================================================================== :TagComment sMsg = "Tagging Comments ..." udsDisplayMsg (sMsg) clist = ";" sTagIdent = "c" sTagList%sTagIdent% = sTagOn ; Start list with tag 'sTagOn' to have at least one item in the list.. ccount = ItemCount (clist, ".") For c = 1 To ccount citem = ItemExtract (c, clist, ".") sBBTag = BinaryTagInit (hBB, citem, @CR) While 1 sBBTag = BinaryTagFind (sBBTag) If (sBBTag == "") Then Break cstr = BinaryTagExtr (sBBTag, 1) cstr = StrCat (citem, cstr) ; Include leading comment char for later colorizing. iItemLocate = ItemLocate (cstr, sTagList%sTagIdent%, @TAB) If !iItemLocate sTagList%sTagIdent% = ItemInsert (cstr, -1, sTagList%sTagIdent%, @TAB) sTag = StrCat (sTagOn, sTagIdent, ItemCount (sTagList%sTagIdent%, @TAB), sTagOff) Else sTag = StrCat (sTagOn, sTagIdent, iItemLocate, sTagOff) EndIf sTag = StrCat (sTag, @CR) ; Exclude trailing 'comment char' (@CR) from colorizing. sBBTag = BinaryTagRepl (sBBTag, sTag) If UseVerbose sMsgUse = StrCat (sMsg, @LF, "BufferUsage ", 100 * BinaryEodGet (hBB) / iBBSize, "%%", @LF, cstr) udsDisplayMsg (sMsgUse) EndIf EndWhile Next ; --- debug --- ; num = udfItemListToFile (sTagList%sTagIdent%, @tab, StrCat(udfGetTempPath(),"wbt2html.sTagList.",sTagIdent,".txt")) Drop (c, ccount, citem, clist, cstr, iItemLocate, sBBTag, sMsg, sMsgUse, sTag, sTagIdent) Return ;========================================================================================================================================== :TagOperatorMod ; This routine needs the round brackets untouched. sMsg = "Tagging Operator mod ..." udsDisplayMsg (sMsg) sTagIdent = "m" sTagList%sTagIdent% = sTagOn ; Start list with tag 'sTagOn' to have at least one item in the list.. If (BinaryIndexEx (hBB, 0, "mod", @FWDSCAN, @FALSE) < 0) Then Return ; Nothing to do. No "mod" text fragment found. ; Workaround for the Regular Expression '[ 0-9\)](mod)[ 0-9\(\+\-]' ; KEDIT: change r '[ 0-9\)](mod)[ 0-9\(\+\-]'<font color="#rrggbb">&1</font>' * * ; Build a list of all combinations. sModList = "" sListL = " 0123456789)" sListR = " 0123456789(+-" iMaxL = StrLen (sListL) iMaxR = StrLen (sListR) For iL = 1 To iMaxL For iR = 1 To iMaxR sModList = ItemInsert (StrCat (StrSub (sListL, iL, 1), StrSub (sListR, iR, 1)), -1, sModList, @TAB) Next Next Drop (iL, iR, iMaxL, iMaxR, sListL, sListR) iModReplaced = 0 iModCount = ItemCount (sModList, @TAB) For iMod = 1 To iModCount mstr = ItemExtract (iMod, sModList, @TAB) sBBTag = BinaryTagInit (hBB, StrCat (StrSub (mstr, 1, 1), "mod"), StrSub (mstr, 2, 1)) While 1 sBBTag = BinaryTagFind (sBBTag) If (sBBTag == "") Then Break If BinaryTagLen (sBBTag, 0) Then Continue ; not a pure "mod", e.g. " (mod)ified " mstr = BinaryPeekStr (hBB, BinaryTagIndex (sBBTag, 1), BinaryTagLen (sBBTag, 1)) sTag = StrCat (sTagOn, sTagIdent, 2, sTagOff) sTag = StrReplace (StrLower (mstr), "mod", sTag) sBBTag = BinaryTagRepl (sBBTag, sTag) iModReplaced = 1 EndWhile If UseVerbose mstr = StrCat (StrSub (mstr, 1, 1), "mod", StrSub (mstr, 2, 1)) sMsgUse = StrCat (sMsg, @LF, "BufferUsage ", 100 * BinaryEodGet (hBB) / iBBSize, "%%", @LF, mstr) udsDisplayMsg (sMsgUse) EndIf Next If iModReplaced Then sTagList%sTagIdent% = ItemInsert ("mod", -1, sTagList%sTagIdent%, @TAB) ; The one and only keyword in this list. ; --- debug --- ; num = udfItemListToFile (sTagList%sTagIdent%, @tab, StrCat(udfGetTempPath(),"wbt2html.sTagList.",sTagIdent,".txt")) ; num = BinaryWrite(hBB,StrCat(udfGetTempPath(),"wbt2html.hBB.",sTagIdent,".bin")) Drop (iMod, iModCount, iModReplaced, mstr, sBBTag, sModList, sMsg, sMsgUse, sTag, sTagIdent) Return ;========================================================================================================================================== :TagOperator sMsg = "Tagging Operators ..." udsDisplayMsg (sMsg) olist = "==.<=.>=.<>.!=.<.>.**.*./.+.-.&&.||.<<.>>.&.|.^.~.!.+.-.=" ; plus ".mod" ; binary(relational,arithmetic,logical),unary(integer logical,integer & float),assignment sTagIdent = "o" sTagList%sTagIdent% = sTagOn ; Start list with tag 'sTagOn' to have at least one item in the list.. ocount = ItemCount (olist, ".") For o = 1 To ocount ostr = ItemExtract (o, olist, ".") sTag = StrCat (sTagOn, sTagIdent, 1 + ItemCount (sTagList%sTagIdent%, @TAB), sTagOff) If BinaryReplace (hBB, ostr, sTag, @TRUE) Then sTagList%sTagIdent% = ItemInsert (ostr, -1, sTagList%sTagIdent%, @TAB) If UseVerbose sMsgUse = StrCat (sMsg, @LF, "BufferUsage ", 100 * BinaryEodGet (hBB) / iBBSize, "%%", @LF, ostr) udsDisplayMsg (sMsgUse) EndIf Next ; --- debug --- ; num = udfItemListToFile (sTagList%sTagIdent%, @tab, StrCat(udfGetTempPath(),"wbt2html.sTagList.",sTagIdent,".txt")) Drop (o, ocount, olist, ostr, sMsg, sMsgUse, sTag, sTagIdent) Return ;========================================================================================================================================== :TagBracket sMsg = "Tagging Brackets ..." udsDisplayMsg (sMsg) blist = "(.).[.].{.}" ; brackets sTagIdent = "b" sTagList%sTagIdent% = sTagOn ; Start list with tag 'sTagOn' to have at least one item in the list.. bcount = ItemCount (blist, ".") For b = 1 To bcount bstr = ItemExtract (b, blist, ".") sTag = StrCat (sTagOn, sTagIdent, 1 + ItemCount (sTagList%sTagIdent%, @TAB), sTagOff) If BinaryReplace (hBB, bstr, sTag, @TRUE) Then sTagList%sTagIdent% = ItemInsert (bstr, -1, sTagList%sTagIdent%, @TAB) If UseVerbose sMsgUse = StrCat (sMsg, @LF, "BufferUsage ", 100 * BinaryEodGet (hBB) / iBBSize, "%%", @LF, bstr) udsDisplayMsg (sMsgUse) EndIf Next ; --- debug --- ; num = udfItemListToFile (sTagList%sTagIdent%, @tab, StrCat(udfGetTempPath(),"wbt2html.sTagList.",sTagIdent,".txt")) Drop (b, bcount, blist, bstr, sTag, sMsg, sMsgUse, sTagIdent) Return ;========================================================================================================================================== :TagSpecial sMsg = "Tagging Special Chars ..." udsDisplayMsg (sMsg) slist = " |,|@|#|::|:" ; Blank,Comma,ASCII-64,ASCII-35,DoubleColon,Colon. (Percent sign too?) sTagIdent = "s" sTagList%sTagIdent% = sTagOn ; Start list with tag 'sTagOn' to have at least one item in the list.. scount = ItemCount (slist, "|") For s = 1 To scount sstr = ItemExtract (s, slist, "|") sTag = StrCat (sTagOn, sTagIdent, 1 + ItemCount (sTagList%sTagIdent%, @TAB), sTagOff) If BinaryReplace (hBB, sstr, sTag, @TRUE) Then sTagList%sTagIdent% = ItemInsert (sstr, -1, sTagList%sTagIdent%, @TAB) If UseVerbose sMsgUse = StrCat (sMsg, @LF, "BufferUsage ", 100 * BinaryEodGet (hBB) / iBBSize, "%%", @LF, sstr) udsDisplayMsg (sMsgUse) EndIf Next ; --- debug --- ; num = udfItemListToFile (sTagList%sTagIdent%, @tab, StrCat(udfGetTempPath(),"wbt2html.sTagList.",sTagIdent,".txt")) Drop (sMsg, sMsgUse, s, scount, slist, sstr, sTag, sTagIdent) Return ;========================================================================================================================================== :TagWordNumber sMsg = "Tagging Words and Numbers ..." udsDisplayMsg (sMsg) sTagIdentWord = "w" sTagList%sTagIdentWord% = sTagOn ; Start list with tag 'sTagOn' to have at least one item in the list. sTagIdentNumber = "n" sTagList%sTagIdentNumber% = sTagOn ; Start list with tag 'sTagOn' to have at least one item in the list. ; "Hide" all @CRLF. BinaryReplace (hBB, @CRLF, StrCat (sTagOn, @CRLF, sTagOff), @FALSE) sBBTag = BinaryTagInit (hBB, sTagOff, sTagOn) While 1 sBBTag = BinaryTagFind (sBBTag) If (sBBTag == "") Then Break sWordNumber = BinaryTagExtr (sBBTag, 1) If (sWordNumber == "") Then Continue If IsNumber (sWordNumber) iItemLocate = ItemLocate (sWordNumber, sTagList%sTagIdentNumber%, @TAB) If !iItemLocate sTagList%sTagIdentNumber% = ItemInsert (sWordNumber, -1, sTagList%sTagIdentNumber%, @TAB) iItemLocate = ItemCount (sTagList%sTagIdentNumber%, @TAB) EndIf sTag = StrCat (sTagOff, sTagOn, sTagIdentNumber, iItemLocate, sTagOff, sTagOn) Else iItemLocate = ItemLocate (sWordNumber, sTagList%sTagIdentWord%, @TAB) If !iItemLocate sTagList%sTagIdentWord% = ItemInsert (sWordNumber, -1, sTagList%sTagIdentWord%, @TAB) iItemLocate = ItemCount (sTagList%sTagIdentWord%, @TAB) EndIf sTag = StrCat (sTagOff, sTagOn, sTagIdentWord, iItemLocate, sTagOff, sTagOn) EndIf sBBTag = BinaryTagRepl (sBBTag, sTag) If UseVerbose sMsgUse = StrCat (sMsg, @LF, "BufferUsage ", 100 * BinaryEodGet (hBB) / iBBSize, "%%", @LF, sWordNumber) udsDisplayMsg (sMsgUse) EndIf EndWhile ; "Unhide" all @CRLF. BinaryReplace (hBB, StrCat (sTagOn, @CRLF, sTagOff), @CRLF, @FALSE) ; --- debug --- ; num = udfItemListToFile (sTagList%sTagIdentNumber%, @tab, StrCat(udfGetTempPath(),"wbt2html.sTagList.",sTagIdentNumber,".txt")) ; num = udfItemListToFile (sTagList%sTagIdentWord%, @tab, StrCat(udfGetTempPath(),"wbt2html.sTagList.",sTagIdentWord,".txt")) ; num = BinaryWrite(hBB,StrCat(udfGetTempPath(),"wbt2html.hBB.",sTagIdentWord,".bin")) Drop (iItemLocate, sMsg, sMsgUse, sBBTag, sTagIdentNumber, sTagIdentWord, sWordNumber, sTag) Return ;========================================================================================================================================== :EncodeNamedEntities sMsg = "Encoding HTML Named Entities ..." udsDisplayMsg (sMsg) sTagListo = StrReplace (sTagListo, "&", "&") sTagListo = StrReplace (sTagListo, "<", "<") sTagListo = StrReplace (sTagListo, ">", ">") sTagListc = StrReplace (sTagListc, "&", "&") sTagListc = StrReplace (sTagListc, "<", "<") sTagListc = StrReplace (sTagListc, ">", ">") sTagListq = StrReplace (sTagListq, "&", "&") sTagListq = StrReplace (sTagListq, '"', """) sTagListq = StrReplace (sTagListq, "<", "<") sTagListq = StrReplace (sTagListq, ">", ">") sTagListq = StrReplace (sTagListq, "{", "{") sTagListq = StrReplace (sTagListq, "}", "}") sTagListc = StrReplace (sTagListc, "ä", "ä") sTagListc = StrReplace (sTagListc, "ö", "ö") sTagListc = StrReplace (sTagListc, "ü", "ü") sTagListc = StrReplace (sTagListc, "Ä", "Ä") sTagListc = StrReplace (sTagListc, "Ö", "Ö") sTagListc = StrReplace (sTagListc, "Ü", "Ü") sTagListc = StrReplace (sTagListc, "ß", "ß") sTagListq = StrReplace (sTagListq, "ä", "ä") sTagListq = StrReplace (sTagListq, "ö", "ö") sTagListq = StrReplace (sTagListq, "ü", "ü") sTagListq = StrReplace (sTagListq, "Ä", "Ä") sTagListq = StrReplace (sTagListq, "Ö", "Ö") sTagListq = StrReplace (sTagListq, "Ü", "Ü") sTagListq = StrReplace (sTagListq, "ß", "ß") ; For details see Unicode "ISO 10646" Return ;========================================================================================================================================== :ColorizeWord sTagIdent = "w" ; If no words to colorize. If (sTagList%sTagIdent% == sTagOn) Drop (sTagList%sTagIdent%) Drop (sTagIdent) BinaryFree (hBBHash) DropWild ("hBBHash*") DropWild ("iBBHash*") Return EndIf iWordCount = ItemCount (sTagList%sTagIdent%, @TAB) iColorCount = ItemCount (sColorNameList, @TAB) ; Fill the specific colorlists with tag 'sTagOn' to have at least one item in the list. sFillItem = StrCat (sTagOn, @TAB) iFillCount = (2 * iWordCount) - 1 ;iFillCount = (2*iWordCount)+1 For iColor = 1 To iColorCount sTagList%sTagIdent%%iColor% = StrFill (sFillItem, iFillCount) Next Drop (sFillItem, iFillCount) ; Find word in HashBuffer and place it into the specific colorlist. iColorDefault = ItemLocate ("default text", sColorNameList, @TAB) For iWord = 2 To iWordCount sWord = ItemExtract (iWord, sTagList%sTagIdent%, @TAB) iBBHashOffset = BinaryHashRec (hBBHash, iBBHashRecSize, iBBHashKeyOffset, iBBHashKeySize, StrLower (sWord)) sColorName = BinaryPeekStr (hBBHash, iBBHashOffset + iBBHashColorNameOffset, iBBHashColorNameSize) If (sColorName == "") BinaryPoke (hBBHash, iBBHashOffset, 0) ; Housekeeping the HashTable. iColor = iColorDefault Else iColor = ItemLocate (sColorName, sColorNameList, @TAB) If iColor == 0 FileAttrSet (sFilenameBBHash, "rash") FileDelete (sFilenameBBHash) Message ("Error", StrCat ("Color name not found.", @LF, "Maybe hash file is corrupt.", @LF, "Run script again.")) Exit EndIf Select UseCase Case 4 sWord = BinaryPeekStr (hBBHash, iBBHashOffset + iBBHashMixCaseOffset, iBBHashMixCaseSize) Break Case 3 sWord = StrUpper (sWord) Break Case 2 sWord = StrLower (sWord) Break Case 1 ; sWord = sWord ; Freestyle, no change. Break EndSelect EndIf sTagList%sTagIdent%%iColor% = ItemReplace (sWord, iWord, sTagList%sTagIdent%%iColor%, @TAB) Next Drop (sTagList%sTagIdent%, iWordCount, sWord, iWord, sColorName, iBBHashOffset, iColorDefault) BinaryFree (hBBHash) ; Hashbuffer has done his job. DropWild ("hBBHash*") DropWild ("iBBHash*") For iColor = 1 To iColorCount If (StrClean (sTagList%sTagIdent%%iColor%, StrCat (@TAB, sTagOn), "", @TRUE, 1) > "") sColorName = ItemExtract (iColor, sColorNameList, @TAB) num = udfItemListToFile (sTagList%sTagIdent%%iColor%, @TAB, StrCat (udfGetTempPath (), "wbt2html.sTagList.", sTagIdent, iColor, ".txt")) sMsg = StrCat ("Colorizing Words (", sColorName, ") ...") GoSub ReplaceColorTag EndIf Drop (sTagList%sTagIdent%%iColor%) Next Drop (iColorCount, sColorName, iColor) Drop (sTagIdent) Return ;========================================================================================================================================== :ColorizeNumber sTagIdent = "n" If (sTagList%sTagIdent% > sTagOn) sMsg = "Colorizing Numbers ..." sColorName = "Number" GoSub ReplaceColorTag EndIf Drop (sColorName, sTagList%sTagIdent%, sTagIdent) Return ;========================================================================================================================================== :ColorizeSpecial sTagIdent = "s" If (sTagList%sTagIdent% > sTagOn) sMsg = "Colorizing Special Chars ..." sColorName = "" ; "Default Text" or "Special" ; sColorName = "" reduces the amount of HTML <font> tags when ; Foreground Color "Default Text" is set in section "WriteCloseTargetFile" by sColorValueFG. GoSub ReplaceColorTag EndIf Drop (sColorName, sTagList%sTagIdent%, sTagIdent) Return ;========================================================================================================================================== :ColorizeBracket sTagIdent = "b" If (sTagList%sTagIdent% > sTagOn) sMsg = "Colorizing Brackets ..." sColorName = "" ; "Default Text" or "Bracket" ; sColorName = "" reduces the amount of HTML <font> tags when ; Foreground Color "Default Text" is set in section "WriteCloseTargetFile" by sColorValueFG. GoSub ReplaceColorTag EndIf Drop (sColorName, sTagList%sTagIdent%, sTagIdent) Return ;========================================================================================================================================== :ColorizeOperator sTagIdent = "o" If (sTagList%sTagIdent% > sTagOn) sMsg = "Colorizing Operators ..." sColorName = "Operator" GoSub ReplaceColorTag EndIf Drop (sColorName, sTagList%sTagIdent%, sTagIdent) Return ;========================================================================================================================================== :ColorizeOperatorMod sTagIdent = "m" If (sTagList%sTagIdent% > sTagOn) sMsg = "Colorizing Operator mod ..." sColorName = "Operator" GoSub ReplaceColorTag EndIf Drop (sColorName, sTagList%sTagIdent%, sTagIdent) Return ;========================================================================================================================================== :ColorizeComment sTagIdent = "c" If (sTagList%sTagIdent% > sTagOn) sMsg = "Colorizing Comments ..." sColorName = "Comment" GoSub ReplaceColorTag EndIf Drop (sColorName, sTagList%sTagIdent%, sTagIdent) Return ;========================================================================================================================================== :ColorizeQuote sTagIdent = "q" If (sTagList%sTagIdent% > sTagOn) sMsg = "Colorizing Quotes ..." sColorName = "Quote" GoSub ReplaceColorTag EndIf Drop (sColorName, sTagList%sTagIdent%, sTagIdent) Return ;========================================================================================================================================== :ReplaceColorTag ; needs a sTagListx udsDisplayMsg (sMsg) If (sTagIdent <> "w") Then iColor = "" sColorValue = ItemExtract (ItemLocate (StrLower (sColorName), sColorNameList, @TAB), sColorValueList, @TAB) ; For later use in procedure WriteCloseTarget. If !IsDefined (sUsedColorNameList) sUsedColorNameList = "" sUsedColorValueList = "" EndIf If (sColorValue > "") sUsedColorNameList = ItemInsert (sColorName, -1, sUsedColorNameList, @TAB) sUsedColorValueList = ItemInsert (sColorValue, -1, sUsedColorValueList, @TAB) EndIf sTagIdentToken = StrCat (sTagOn, sTagIdent, "{{1}}", sTagOff) ; sFontTag = StrReplace(sFontTagMask,"{{1}}",sColorValue) ; Append one dummy item. sTagList%sTagIdent%%iColor% = ItemInsert (sTagOn, -1, sTagList%sTagIdent%%iColor%, @TAB) iTagCount = ItemCount (sTagList%sTagIdent%%iColor%, @TAB) iTagCount = iTagCount - 1 ; Discard dummy count. If (sColorValue > "") sTagPre = StrReplace (sFontTagPre, "{{1}}", sColorValue) sTagPost = sFontTagPost sTagList%sTagIdent%%iColor% = StrReplace (sTagList%sTagIdent%%iColor%, @TAB, StrCat (sTagPost, @TAB, sTagPre)) ; --- debug --- ; num = udfItemListToFile (sTagList%sTagIdent%%iColor%, @tab, StrCat(udfGetTempPath(),"wbt2html.sTagList#.",sTagIdent,iColor,".txt")) sTagList%sTagIdent%%iColor% = StrReplace (sTagList%sTagIdent%%iColor%, StrCat (sTagOn, sTagPost), sTagOn) sTagList%sTagIdent%%iColor% = StrReplace (sTagList%sTagIdent%%iColor%, StrCat (sTagPre, sTagOn), sTagOn) ; --- debug --- ; num = udfItemListToFile (sTagList%sTagIdent%%iColor%, @tab, StrCat(udfGetTempPath(),"wbt2html.sTagList##.",sTagIdent,iColor,".txt")) EndIf ;For iTag=iTagCount To 2 By -1 For iTag = 2 To iTagCount sTag = ItemExtract (iTag, sTagList%sTagIdent%%iColor%, @TAB) ; Skip placeholder. If (sTag == sTagOn) Then Continue sTagToken = StrReplace (sTagIdentToken, "{{1}}", iTag) ; ; Empty sTag requires no colorizing. ; If (sTag=="") ; BinaryReplace(hBB,sTagToken,sTag,@FALSE) ; Continue ; EndIf ; Create the font color html tag. ; If (sColorValue>"") Then sTag = StrReplace(sFontTag,"{{2}}",sTag) BinaryReplace (hBB, sTagToken, sTag, @FALSE) If UseVerbose iPercent = 100 - (100 * iTag / iTagCount) If !(iPercent mod 10) udsDisplayMsg (StrCat (sMsg, @LF, "Tags done ", iPercent, "%%", @LF, "BufferUsage ", 100 * BinaryEodGet (hBB) / iBBSize, "%%")) EndIf EndIf If UseAnimation iPercent = 100 - (100 * iTag / iTagCount) iBBEod = BinaryEodGet (hBB) - 1 iBBEodFactor = iBBEod / iTagCount iBBBottom = iBBEodFactor * (iTag - 1) iBBTop = Min (iBBEod - iBBBottom, iBBBottom + iBBEodFactor) ; Important Note: BoxText causes an error 12000 abort if this script has been called via WSPOPUP.MNU ! BoxText (StrCat (sMsg, @LF, "Tags done ", iPercent, "%%", @LF, BinaryPeekStr (hBB, iBBBottom, iBBTop))) EndIf Next Drop (iBBBottom, iBBTop, iBBEod, iBBEodFactor, sTag, iTag, iPercent) Drop (sColorValue, iTagCount) Drop (sTagIdentToken, sTagToken) Drop (sTagList%sTagIdent%%iColor%) Return ;========================================================================================================================================== :OpenReadSourceFile sMsg = "Reading source file " sMsg = StrCat (sMsg, @LF, sFilenameSource) udsDisplayMsg (sMsg) iFileSize = FileSizeEx (sFilenameSource) Terminate (!iFileSize, "Error", "Sourcefile has FileSize=0") Exclusive (@OFF) If (iFileSize > 16384) Then Exclusive (@ON) ; Speed up performance on large files. iBBSize = iFileSize * 12 ; Or more ? (changing plain text to html lets grow the file sometimes enormously). iBBSize = Max (16384, iBBSize) ; Minimum 16KB Buffer. hBB = BinaryAlloc (iBBSize) BinaryPokeStr (hBB, 0, @LF) ; A little helper @LF. BinaryPokeStr (hBB, 1, @CRLF) ; A little helper @CRLF. BinaryReadEx (hBB, 3, sFilenameSource, 0, iFileSize) BinaryPokeStr (hBB, BinaryEodGet (hBB), @CRLF) ; A little helper @CRLF. BinaryPokeStr (hBB, BinaryEodGet (hBB), @CR) ; A little helper @CR. BinaryReplace (hBB, @TAB, StrFill (" ", UseTabReplaceSize), @FALSE) ; Clean Tabs. Drop (iFileSize) Return ;========================================================================================================================================== :CalculateDelimiters sMsg = "Calculating delimiters ... be patient ... on file" sMsg = StrCat (sMsg, @LF, sFilenameSource) udsDisplayMsg (sMsg) ; Create a chartable ... sTag = "" For iTag = 1 To 31 sTag = StrCat (sTag, Num2Char (iTag)) Next For iTag = 129 To 255 sTag = StrCat (sTag, Num2Char (iTag)) Next sTag = StrReplace (sTag, @TAB, "") sTag = StrReplace (sTag, @CR, "") sTag = StrReplace (sTag, @LF, "") sTag = StrClean (sTag, BinaryPeekStr (hBB, 0, BinaryEodGet (hBB) - 1), "", @FALSE, 1) ; ... and have used chars deleted. Terminate ((StrLen (sTag) < 2), StrCat (sProgLogo, "Error"), "This special sourcefile cannot be converted into HTML ('tag chars not available').") sTagOn = StrSub (sTag, 1, 1) sTagOff = StrSub (sTag, 2, 1) Drop (iTag, sTag) Return ;========================================================================================================================================== :WriteCloseTargetFile sMsg = "Writing target file ..." sMsg = StrCat (sMsg, @LF, sFilenameTarget) udsDisplayMsg (sMsg) ; --- Create HTML page structure with Header and Footer. ; Create comments. ; sHtmTagCommentOpen = "<!-- " ; The standard HTML comment opening tag. sHtmTagCommentOpen = "<! " ; Tweaked for better use in WinBatch Forum. sHtmTagCommentClose = " -->" sHtmCommentLogo = StrCat ("[", TimeYmdHms (), "]") sHtmCommentLogo = StrCat (sHtmCommentLogo, " colorized HTML by ", sProgProduct, " v", sProgVersion, " ", sProgCopyright) sHtmCommentLogo = StrCat (sHtmTagCommentOpen, sHtmCommentLogo, sHtmTagCommentClose) sHtmCommentColorList = "" iCount = ItemCount (sUsedColorNameList, @TAB) For i = 1 To iCount sColorNameItem = ItemExtract (i, sUsedColorNameList, @TAB) sColorValueItem = ItemExtract (i, sUsedColorValueList, @TAB) sHtmCommentColorList = ItemInsert (StrCat ('"', sColorNameItem, '"="', sColorValueItem, '"'), -1, sHtmCommentColorList, ";") Next Drop (i, iCount, sUsedColorNameList, sUsedColorValueList) sHtmCommentColorList = StrCat (sHtmTagCommentOpen, sHtmCommentColorList, sHtmTagCommentClose) ; Set default font style attributes. sFontFamily = "Courier New" sFontSize = "9" sFontWeight = "400" sFontStyle = "0" ; Read font attributes for WIL files from WinBatch Studio Registry. sRegKeySub = "Software\Wilson WindowWare\WinBatch Studio\Settings\File types\WIL Files" If RegExistKey (@REGCURRENT, sRegKeySub) hRegKey = RegOpenKeyEx (@REGCURRENT, sRegKeySub, 1, "", "") ; Mode=1=KEY_QUERY_VALUE=Permission to query subkey data ; We only need read access. sRegKeySub = "[Font name]" If RegExistValue (hRegKey, sRegKeySub) Then sFontFamily = RegQueryValue (hRegKey, sRegKeySub) sRegKeySub = "[Font size]" If RegExistValue (hRegKey, sRegKeySub) Then sFontSize = RegQueryValue (hRegKey, sRegKeySub) sRegKeySub = "[Font weight]" If RegExistValue (hRegKey, sRegKeySub) Then sFontWeight = RegQueryValue (hRegKey, sRegKeySub) sRegKeySub = "[Font Italic]" If RegExistValue (hRegKey, sRegKeySub) Then sFontStyle = RegQueryValue (hRegKey, sRegKeySub) RegCloseKey (hRegKey) Drop (hRegKey, sRegKeySub) EndIf sFontStyle = ItemExtract (1 + sFontStyle, "normal,italic", ",") ; Translate number to string. sStyleFont = "font-family:'{{1}}'; font-size:{{2}}pt; font-weight:{{3}}; font-style:{{4}}; " sStyleFont = StrReplace (sStyleFont, "{{1}}", sFontFamily) sStyleFont = StrReplace (sStyleFont, "{{2}}", sFontSize) sStyleFont = StrReplace (sStyleFont, "{{3}}", sFontWeight) sStyleFont = StrReplace (sStyleFont, "{{4}}", sFontStyle) DropWild ("sFont*") ; Set style attributes for Foreground, Background, Border, Image. sColorValueFg = StrLower (ItemExtract (ItemLocate (StrLower ("Default Text"), sColorNameList, @TAB), sColorValueList, @TAB)) sColorValueBg = StrLower (ItemExtract (ItemLocate (StrLower ("Background"), sColorNameList, @TAB), sColorValueList, @TAB)) If UseRGB sColorValueFg = StrCat ('rgb(', sColorValueFg, ')') sColorValueBg = StrCat ('rgb(', sColorValueBg, ')') EndIf sStyleColorFg = StrCat ('color:', sColorValueFg, '; ') sStyleColorBg = StrCat ("background-color:", sColorValueBg, "; ") sStyleBorder = "border:1pt solid #dddddd; padding:3pt; width:100%%; " sStyleImageBg = "background-image:url(../images/gif/grid.gif); " ; My background image. ; sStyleImageBg = "" ; Activate this line if no background image to use. ; Create PRE tag. sHtmTagPre = StrCat ('<pre style="', sStyleImageBg, sStyleColorBg, sStyleBorder, sStyleFont, sStyleColorFg, '"') sHtmTagPre = StrCat (sHtmTagPre, ' title="colorized by ', sProgProduct, '">') ; Create Header, Footer. sHtmHeader = StrCat ('<html>', @CRLF, '<body>', @CRLF, sHtmCommentLogo, @CRLF, sHtmCommentColorList, @CRLF, sHtmTagPre, @CRLF) sHtmFooter = StrCat ('</pre>', @CRLF, '</body>', @CRLF, '</html>', @CRLF) ; Write the HTML file. BinaryEodSet (hBB, BinaryEodGet (hBB) - 1) ; Cut little helper @CR. BinaryEodSet (hBB, BinaryEodGet (hBB) - 2) ; Cut little helper @CRLF. If (BinaryPeekStr (hBB, BinaryEodGet (hBB) - 2, 2) <> @CRLF) Then BinaryPokeStr (hBB, BinaryEodGet (hBB), @CRLF) ; Add @CRLF for sure. hBBHelp = BinaryAlloc (1024) BinaryWriteEx (hBBHelp, 0, sFilenameTarget, 0, -1) ; Set new eof marker. BinaryPokeStr (hBBHelp, 0, sHtmHeader) BinaryWriteEx (hBBHelp, 0, sFilenameTarget, 0, BinaryEodGet (hBBHelp)) ; Write Header. BinaryWriteEx (hBB, 3, sFilenameTarget, FileSize (sFilenameTarget), BinaryEodGet (hBB) - 3) ; Write the main buffer, ommit helper @CRLF@CR. BinaryEodSet (hBBHelp, 0) BinaryPokeStr (hBBHelp, 0, sHtmFooter) BinaryWriteEx (hBBHelp, 0, sFilenameTarget, FileSize (sFilenameTarget), BinaryEodGet (hBBHelp)) ; Write Footer. ; Close Buffers. BinaryFree (hBBHelp) BinaryFree (hBB) Drop (hBB, hBBHelp) sMsg = "Ready." udsDisplayMsg (sMsg) TimeDelay (1) If (RtStatus () <> 10) Then BoxShut () DropWild ("sStyle*") DropWild ("sColor*") DropWild ("sHtm*") DropWild ("Use*") Return ;========================================================================================================================================== :ProgInit sProgProduct = "WBT2HTML" sProgVersion = "1.30" sProgVersionDate = "20030711" sProgCreationDate = "20010729" sProgCompanyName = "Detlev Dalitz" sProgCopyright = StrCat ("(c)", sProgCreationDate, "-", sProgVersionDate, " ", sProgCompanyName) sProgLogo = StrCat (sProgProduct, ": ") sProgLogoLong = StrCat (sProgProduct, " v", sProgVersion, " ", sProgVersionDate, " ", sProgCopyright) If (RtStatus () <> 10) Then BoxOpen (sProgLogoLong, "Be patient") sMsg = "Initiating ..." udsDisplayMsg (sMsg) If UseRGB sFontTagMask = StrCat ('<font color="rgb({{1}})">{{2}}</font>') sFontTagPre = '<font color="rgb({{1}})">' sFontTagPost = '</font>' Else sFontTagMask = StrCat ('<font color="{{1}}">{{2}}</font>') sFontTagPre = '<font color="{{1}}">' sFontTagPost = '</font>' EndIf If (UseAnimation && (RtStatus () == 10)) Then BoxOpen (sProgLogoLong, "Be patient, 'animated run' will follow after tagging ...") Return ;========================================================================================================================================== :GetParams Drop (sFilenameSource, sFilenameTarget) If !ItemLocate (StrLower (FileExtension (Param1)), "wbt|web", "|") Message ("Error", StrCat (sProgProduct, " needs a *.WBT or *.WEB file as input.")) iParamError = 1 Else If IsDefined (Param1) Then sFilenameSource = Param1 If IsDefined (Param2) sFilenameTarget = StrCat (FilePath (Param2), FileRoot (Param2), ".htm") ; Force extension. Else sFilenameTarget = StrCat (FilePath (Param1), FileRoot (Param1), ".", FileExtension (Param1), ".htm") ; Add extension. EndIf iParamError = 0 EndIf Return ;========================================================================================================================================== :AskParams AFN_folder = "W:\WINBATCH\TEST\" ; Define your standard folder here. AFN_title = "WBT2HTML: Select WBT or WEB File to convert to HTM" AFN_filetypes = "WIL Files|*.wbt;*.web|HTML Files|*.htm;*.html|All Files|*.*|" AFN_default = "*.wbt;*.web" AFN_flag = 1 ; Open single file. While 1 sFilenameSource = AskFilename (AFN_title, AFN_folder, AFN_filetypes, AFN_default, AFN_flag) AFN_folder = FilePath (sFilenameSource) If !Call (IntControl (1004, 0, 0, 0, 0), '"%sFilenameSource%"') ; Call this script again with quoted filename. sFilenameHtm = StrCat (sFilenameSource, ".htm") If (FileExist (sFilenameHtm)) Then RunZoom ("iexplore.exe", sFilenameHtm) EndIf EndWhile Exit ; ToDo notes: ; The starting AFN_folder should be added to section UserConfigurableInit, may add to INI file. ; May remember the last working folder in INI file. ; sHtmFile should be identical to sFilenameTarget (may make the same variable) ;========================================================================================================================================== ;========================================================================================================================================== :UserConfigurableInit ;############ user configurable area begin ############### ;------------------------------------------------------------------------------------------------------------------------------------------ ;UseCase=1 ; 1=freestyle ;UseCase=2 ; 2=lowercase ;UseCase=3 ; 3=uppercase UseCase = 4 ; 4=standardcase as defined in WIL.CLR resp. as stored in HashTable ;UseRGB=@TRUE ; activate this line for '<font color="rgb(rrr,ggg,bbb)"></font>' UseRGB = @FALSE ; activate this line for '<font color="#rrggbb"></font>' ;UseVerbose=@TRUE ; more screen Messages UseVerbose = @FALSE ; less screen Messages ;UseAnimation=@TRUE ; If you have time to waste and need some animation ... UseAnimation = @FALSE ;UseAutoDelimiter=@TRUE UseAutoDelimiter = @FALSE ;If you set UseAutoDelimiter=@false then sTagOn and sTagOff must be defined manually!!! ;Otherwise unpredictable results will occur! sTagOn = Num2Char (215) sTagOff = Num2Char (208) UseTabReplaceSize = 3 ; If there exist tabs in the source file then replace it with blanks ;------------------------------------------------------------------------------------------------------------------------------------------ Return ;########################### user configurable area end ################# ;========================================================================================================================================== ;========================================================================================================================================== ; Syntax 1 (call by another program or start on the commandline without Parameters): ; WBT2HTML.WBT ; opens an AskFilename dialog ; ; Syntax2 (call or start with Parameters): ; WBT2HTML.WBT sFilenameSource [sFilenameTarget] ; ; If sFilenameTarget is omitted then sFilenameSource will be used ; with added extension ".htm" ; ; Example1: ; WBT2HTML.WBT mybest.wbt ; will create mybest.wbt.htm ; ; Example2: ; WBT2HTML.WBT mybest.wbt mybad.htm ; will create mybad.htm ; ; Good luck! Viel Spass! And happy converting ... ;========================================================================================================================================== ;========================================================================================================================================== ; This was the initial idea and starting point of this program: ; -- mit Quotes, KEDIT change r §((("{[~"]@}")|('{[~']@}')|(`{[~`]@}`)))\c§<_font color="#aaaaaa">&1&2&3<_/font>§ * * -- ; -- ohne Quotes, KEDIT change r §((({"}{[~"]@}{"})|({'}{[~']@}{'})|({`}{[~`]@}{`})))\c§<_font color="#aaaaaa">&2&5&8<_/font>§ * * -- ;========================================================================================================================================== ;========================================================================================================================================== ; Note: ; - WBT2HTML creates an ini file "wbt2html.ini" in WinBatch system folder. ; - Creates a hash file "WIL.HSH" in temp folder. ; - HTML output is placed in source folder. ; - Needs WIL's serial extender "wwser34i.dll" if the WIL Interpreter version number is less than "3.8hch" (less than v2002h). ;========================================================================================================================================== ;========================================================================================================================================== ; Note: ; Although it is possible to call the WBT2HTML.wbt script via WSPOPUP.MNU entry, ; the script would not run successfully if UseAnimation is set @TRUE. ; The 'Animation' uses the normal BoxText statement, but this is ; NOT allowed to be used from within the WSPOPUP.MNU environment. ; The script will abort with error number 12000. ; ; Workaround: ; Choice 1. Always do set 'UseAnimation=@FALSE' if calling the script via WSPOPUP.MNU. ; Choice 2. 'Run' the WBT2HTML.WBT via WSPOPUP.MNU entry. ; Choice 3. 'Run' or 'Runwait' the WBT2HTML.WBT via a helper wbt script which is called from WSPOPUP.MNU entry. ; Choice 3 allows to select text passages from current edit text and send it via ClipGet to WBT2HMTL.WBT. ; Those caller script can be something like the following script 'WBStudioToWBT2HTML.wbt'. ;========================================================================================================================================== ;========================================================================================================================================== ; Known Issues: ; None. ;========================================================================================================================================== ;========================================================================================================================================== ; WBStudioToWBT2HTML.wbt ;========================================================================================================================================== ; Caller utility for WBT2HTML.WBT. ; This script should only be called from a WSPOPUP.MNU menu entry from within WinBatch Studio. ; It directs the selected edit text via Clipboard and external tempfile to the WBT2HTML.WBT. ; After returning from WBT2HTML transformation it puts the html output data to Clipboard for following pasting elsewhere. ;------------------------------------------------------------------------------------------------------------------------------------------ ; Call this cript from WSPOPUP.MNU, for example: ; ; WBT2HTML via ClipBoard ; call("W:\WINBATCH\Scripts\WBStudioToWBT2HTML.wbt","") ; ;------------------------------------------------------------------------------------------------------------------------------------------ ; Detlev Dalitz.20011113.20020808 ;------------------------------------------------------------------------------------------------------------------------------------------ InStudio = (RtStatus () == 10) If !InStudio Then Exit If InStudio If !wGetSelState () Then wSelectAll () wCopy () EndIf wClearSel () iBBSize = BinaryClipGet (0, 1) If !iBBSize Then Return ; nothing to do hBB = BinaryAlloc (iBBSize) num = BinaryClipGet (hBB, 1) Display (2, "WBT2HTML", "Selected Text copied to ClipBoard, %num% Byte to format ...") tempfile = FileCreateTemp ("TMP") tempfile = FileLocate (tempfile) wbtfile = StrCat (tempfile, ".wbt") htmfile = StrCat (tempfile, ".htm") FileRename (tempfile, wbtfile) num = BinaryWrite (hBB, wbtfile) BinaryFree (hBB) WILBatchfile = '"W:\WINBATCH\Scripts\WBT2HTML.WBT"' ; Change the path to your needs. RunWait (StrCat (DirHome (), "WinBatch.exe"), StrCat (WILBatchfile, " ", wbtfile, " ", htmfile)) If FileExist (htmfile) iBBSize = FileSize (htmfile) hBB = BinaryAlloc (iBBSize) num = BinaryRead (hBB, htmfile) num = BinaryClipPut (hBB, 1) num = BinaryClipGet (0, 1) BinaryFree (hBB) Display (2, "WBT2HTML", "HTML copied to ClipBoard, %num% Byte to paste ...") EndIf :CANCEL FileDelete (htmfile) FileDelete (wbtfile) Drop (hBB, iBBSize, htmfile, InStudio, num, tempfile, wbtfile, WILBatchfile) Exit ;========================================================================================================================================== ;========================================================================================================================================== ; ; WBT2HTML.WBT Version History ; ;========================================================================================================================================== ; 2003:07:11 v1.30 ; - Changed coloring method and usage of sTagListx lists in procedure 'ReplaceColorTag'. ; -------------------------------------------------------------------------------- ; 2003:07:10 v1.29 ; - Minor speed enhancements in procedures 'ReplaceColorTag' and 'WriteCloseTargetFile'. ; -------------------------------------------------------------------------------- ; 2003:01:03 v1.28 ; - Replaced function 'udfDirGetLong ()' by function 'udfGetLongPathNameA ()' ; because of quirks with function 'FileNameLong' on networked folders. ; -------------------------------------------------------------------------------- ; 2002:12:01 v1.27 ; - Changes in the 'GetHashBufferDefinition' procedure. ; Set 'iBBHashKeySize=260' ; because of the availability of larger sized 'Goto' labels in the upcoming WinBatch version 2002J. ; This makes the size of the temporary hashbuffer grow too. The buffer file is now about 1.7 MB. ; -------------------------------------------------------------------------------- ; 2002:09:28 v1.26 ; - Changes in the 'LabelCreateHashTable' procedure, section 'Create HashTable'. ; Try to make the hash more perfect by a prime related calculation rule. ; -------------------------------------------------------------------------------- ; 2002:08:25 v1.25 ; - Changes in the 'WriteCloseTargetFile' procedure. ; Version v1.22 did not fix entirely the Registry read problems ; which occur after a fresh WinBatch installation. Should be fixed now. ; - Some changes around the inifile wbt2html.ini. ; Added support for MD5 fingerprint by using newly introduced (v2002h) binary function 'BinaryChecksum'. ; This makes the call to the CRC32 routine 'pCheckBinary' of the serial extender obsolete. ; The call to the CRC32 routine is still supported to allow WBT2HTML to run on older versions of WinBatch too ; (... but subject to change in the future). ; - Some small changes here and there to speed up performance a little. ; -------------------------------------------------------------------------------- ; 2002:08:23 v1.24 ; - Changes in the 'CollectKeywords' procedure. I believe hashing should be better now. ; - Some small changes here and there to speed up performance a little. ; -------------------------------------------------------------------------------- ; 2002:08:17 v1.23 ; - Changes in the 'TagQuote' procedure. ; Issue with more than one literal per line using different quotes should be resolved. ; - If the WIL.CLR file has been changed, then the reuse of a remaining old hash buffer file can cause an error. ; For example: Some new function name has been added to WIL.CLR file, but has not been stored in the hash buffer. ; This will cause a "color not found" error (iColor=0). ; In this case the script deletes the existing buffer file, and alarms the user to run the script again. ; Then a new hash buffer file will be created automatically. ; -------------------------------------------------------------------------------- ; 2002:08:16 v1.22 ; - Changes in the 'CollectColors' procedure. ; It occurs after a fresh new installation of WinBatch that the standard 'WIL Files' rgb color values ; are not yet defined in the Registry resp. WinBatch Studio does not know how to deal with it properly. ; Now I have hardcoded the default values for 'WIL Files' from WSINIT.DLL into the procedure as default values. ; Afterwards I try to replace them with the current users settings from Registry, if the values are readable. ; (Bug report by email from: Date: Fri, 16 Aug 2002 10:26:33 -0400, Don Tuttle <wdon@triad.rr.com>) ; -------------------------------------------------------------------------------- ; 2002:08:15 v1.21 ; - Mostly name changes for better datatype consistency and code readability (not finished yet). ; -------------------------------------------------------------------------------- ; 2002:08:11 v1.20 ; - Mostly name changes for better datatype consistency and code readability (not finished yet). ; - Added support for WebBatch *.web files in AskFileName dialog. ; (By email request from: Date: Sat, 10 Aug 2002 22:57:15 -0500, From: Bill Meek <winbatch@tfic.com>) ; -------------------------------------------------------------------------------- ; 2002:08:08 v1.19 ; There was an issue with embedded semicolon in quotes. ; I believed that those problems were gone since v1.17 ... fixed. ; -------------------------------------------------------------------------------- ; 2002:08:07 v1.18 ; - Version v1.17 (and maybe some versions prior) did not run successful in animated mode. ; There was some code lost ... yes, I know ... never change a running system ... ; 'UseAnimation=@TRUE' should work again now (... did someone ever run it ?). ; - I added a caller routine for use from within WinBatch Studio, to be called by menu item from WSPOPUP.MNU. ; This allows to copy and paste selected text easily from within Studio editor. ; - Please read the added notes about the 'BoxText' statement, WSPOPUP.MNU, ; and 'WIL Extender Error: 12000: This command is not available as a WinBatch Studio menu command.' ; -------------------------------------------------------------------------------- ; 2002:08:05 v1.17 ; - WBT2HTML stepped up to a level something like 'WinBatch official documentation tool' ; as introduced in "The WinBatch News - August 2002". ; I feel honoured, that the WinBatch crew use my tool, ; regardless the flood of bugs, which I will discover afterwards ... :-) ; - This Version History list begins. ; -------------------------------------------------------------------------------- ; 2001:07:29 v1.00 ; Inspired by some Java colorizer and seen in other documents on the Internet ; I discovered the idea for me to build a colorizer tool for the WinBatch Scripting Language, ; that had become known to me in fall 2000. ; I did the job both to create something useful with WinBatch and to train my programming skills. ; Because the WinBatch toolbox does not support regular expressions like other scripting languages do, ; for example KEDIT or Visual Basic, I had to build several workarounds. ; I decided not to use a streaming or line oriented model but use extensively the ; WinBatch Binary Buffer features in a more object oriented, somewhat hash related manner. ;==========================================================================================================================================