;========================================================================================================================================== ; WBT2HTML v1.25 20020824 (c) Detlev Dalitz 2001:07:29:00:00:00 ;========================================================================================================================================== ; User information is placed at end of file. ;------------------------------------------------------------------------------------------------------------------------------------------ IntControl (73, 1, 0, 0, 0) ; Install the errorhandler. iParamError = 0 If Param0 GoSub GetParams Else Goto AskParams EndIf If !iParamError GoSub DefineUDFs GoSub UserConfigurableInit GoSub ProgInit GoSub CollectColors GoSub CollectKeywords GoSub OpenReadSourceFile If UseAutoDelimiter Then GoSub CalculateDelimiters GoSub TagQuote GoSub TagComment GoSub TagOperatorMod GoSub TagOperator GoSub TagBracket GoSub TagSpecial GoSub TagWordNumber GoSub EncodeNamedEntities GoSub ColorizeWord GoSub ColorizeNumber GoSub ColorizeSpecial GoSub ColorizeOperator GoSub ColorizeOperatorMod GoSub ColorizeBracket GoSub ColorizeComment GoSub ColorizeQuote GoSub WriteCloseTargetFile EndIf If IntControl (77, 80, 0, 0, 0) Then Return (iParamError) :CANCEL Exit ;========================================================================================================================================== :DefineUDFs ;------------------------------------------------------------------------------------------------------------------------------------------ If ItemLocate ("udfbytetohex", IntControl (77, 103, 0, 0, 0), @TAB) Then Goto skip_udfbytetohex #DefineFunction udfByteToHex (Byte) Return (StrCat (Num2Char (48 + (Byte >> 4) + (39 * ((Byte >> 4) > 9))), Num2Char (48 + (Byte & 15) + (39 * ((Byte & 15) > 9))))) ; lowercase ; Return (StrCat(Num2Char(48+(Byte>>4)+(7*((Byte>>4)>9))),Num2Char(48+(Byte&15)+(7*((Byte&15)>9))))) ; uppercase #EndFunction :skip_udfbytetohex ;------------------------------------------------------------------------------------------------------------------------------------------ If ItemLocate ("udffilechecksum", IntControl (77, 103, 0, 0, 0), @TAB) Then Goto skip_udffilechecksum #DefineFunction udfFileChecksum (sFilename, iRequest) If (VersionDLL () < "3.8hch") Then Return ("") iBBSize = FileSizeEx (sFilename) If !iBBSize Then Return ("") iRequest = Min (2, Max (0, iRequest)) hBB = BinaryAlloc (iBBSize) BinaryRead (hBB, sFilename) sChecksum = BinaryChecksum (hBB, iRequest) BinaryFree (hBB) Return (sChecksum) ;.......................................................................................................................................... ; "iRequest" specifies the type of digest or CRC to generate, ; and can be one of the following values: ; ; Request Meaning Return string format (x = hex character) ; ------- ---------- ---------------------------------------- ; 0 MD5 digest "xxxxxxxx-xxxxxxxx-xxxxxxxx-xxxxxxxx" ; 1 16-bit CRC "xxxx" ; 2 32-bit CRC "xxxxxxxx" ; ; Requires WinBatch version 2002h, 3.8hch. ;.......................................................................................................................................... #EndFunction :skip_udffilechecksum ;------------------------------------------------------------------------------------------------------------------------------------------ If ItemLocate ("udffilecrc32", IntControl (77, 103, 0, 0, 0), @TAB) Then Goto skip_udffilecrc32 #DefineFunction udfFileCrc32 (sFilename) iBBSize = FileSize (sFilename) If !iBBSize Then Return (0) AddExtender ("wwser34i.dll") hBB = BinaryAlloc (iBBSize) BinaryRead (hBB, sFilename) iChecksum = pCheckBinary (IntControl (42, hBB, 0, 0, 0), BinaryEodGet (hBB) - 1, 32) BinaryFree (hBB) Return (iChecksum) #EndFunction :skip_udffilecrc32 ;------------------------------------------------------------------------------------------------------------------------------------------ If ItemLocate ("udfgettemppath", IntControl (77, 103, 0, 0, 0), @TAB) Then Goto skip_udfgettemppath #DefineFunction udfGetTempPath () ftemp = FileCreateTemp ("TMP") FileDelete (ftemp) TempPath = FilePath (ftemp) Terminate (!DirMake (TempPath), "udfGetTempPath", StrCat ("Cannot access temporary folder:", @LF, TempPath)) Return (TempPath) #EndFunction :skip_udfgettemppath ;------------------------------------------------------------------------------------------------------------------------------------------ If ItemLocate ("udfdirgetlong", IntControl (77, 103, 0, 0, 0), @TAB) Then Goto skip_udfdirgetlong #DefineFunction udfDirGetLong () Return (StrCat (FileNameLong (StrCat (DirGet (), ".")), "\")) #EndFunction :skip_udfdirgetlong ;------------------------------------------------------------------------------------------------------------------------------------------ If ItemLocate ("udsdisplaymsg", IntControl (77, 103, 0, 0, 0), @TAB) Then Goto skip_udsdisplaymsg #DefineSubRoutine udsDisplayMsg (sMsgText) If (RtStatus () == 10) Then wStatusMsg (StrCat (sLogo, sMsgText)) Else BoxText (StrCat (sLogo, sMsgText)) sMsgText = "" #EndSubRoutine :skip_udsdisplaymsg ;------------------------------------------------------------------------------------------------------------------------------------------ If ItemLocate ("udfitemlisttofile", IntControl (77, 103, 0, 0, 0), @TAB) Then Goto skip_udfitemlisttofile #DefineFunction udfItemListToFile (list, delimiter, filename) If (list == "") Then Return (0) list = StrReplace (list, delimiter, @CRLF) hBB = BinaryAlloc (StrLen (list)) BinaryPokeStr (hBB, 0, list) num = BinaryWrite (hBB, filename) BinaryFree (hBB) Return (num) #EndFunction :skip_udfitemlisttofile ;------------------------------------------------------------------------------------------------------------------------------------------ If ItemLocate ("udfisprimenumber", IntControl (77, 103, 0, 0, 0), @TAB) Then Goto skip_udfisprimenumber #DefineFunction udfIsPrimeNumber (iNumber) iLimit = Int (Sqrt (iNumber)) iIsPrime = 1 For i = 2 To iLimit iIsPrime = iNumber mod i If !iIsPrime Then Break Next Return (iIsPrime) #EndFunction :skip_udfisprimenumber ;------------------------------------------------------------------------------------------------------------------------------------------ If ItemLocate ("udfgetprimethisornext", IntControl (77, 103, 0, 0, 0), @TAB) Then Goto skip_udfgetprimethisornext #DefineFunction udfGetPrimeThisOrNext (iNumber) While !udfIsPrimeNumber (iNumber) iNumber = iNumber + 1 EndWhile Return (iNumber) #EndFunction :skip_udfgetprimethisornext ;------------------------------------------------------------------------------------------------------------------------------------------ Return ; from DefineUDFs ;========================================================================================================================================== ;========================================================================================================================================== ;Procedures ;========================================================================================================================================== :wbErrorHandler wbError = LastError () wbErrorMsg = "" wbErrorMsg = StrCat (wbErrorMsg, "LastError Value", @LF, ' = ', wbError, @LF) If !wbError Then wbError = -1 wbErrorMsg = StrCat (wbErrorMsg, "LastError String", @LF, ' = "', IntControl (34, wbError, 0, 0, 0), '"', @LF) ; line in script that caused Error) wbErrorMsg = StrCat (wbErrorMsg, "wbErrorHandlerLine", @LF, ' = "', wbErrorHandlerLine, '"', @LF) ; offset into script of error line, in bytes wbErrorMsg = StrCat (wbErrorMsg, "wbErrorHandlerOffset", @LF, ' = ', wbErrorHandlerOffset, @LF) ; variable being assigned on error line, or "" If none wbErrorMsg = StrCat (wbErrorMsg, "wbErrorHandlerAssignment", @LF, ' = ', wbErrorHandlerAssignment, @LF) If (wbErrorhandlerassignment > "") Then %wbErrorhandlerassignment% = "eeek" Message ("wbErrorHandler", wbErrorMsg) Exit ;========================================================================================================================================== ;========================================================================================================================================== :CollectColors ; collect names and rgb color values sMsg = "Collecting colors ..." udsDisplayMsg (sMsg) ; We use the default rgb color values as defined in WSINIT.DLL and try to update them from the Current User Registry. sColorNameList = StrCat ("Keyword", @TAB, "Quote", @TAB, "Comment", @TAB, "Default Text", @TAB, "Background") sColorValueList = StrCat ("0,0,255", @TAB, "255,0,0", @TAB, "0,128,0", @TAB, "0,0,0", @TAB, "255,255,255") ;--- Read colors for WIL files from WinBatch Studio Registry. ----------------------------------------------------------------------------- sRegKeySub = "Software\Wilson WindowWare\WinBatch Studio\Settings\File types\WIL Files" If RegExistKey (@REGCURRENT, sRegKeySub) hRegKey = RegOpenKeyEx (@REGCURRENT, sRegKeySub, 1, "", "") ; Mode=1=KEY_QUERY_VALUE=Permission to query subkey data ; We only need read access. iColorCount = ItemCount (sColorNameList, @TAB) For iColor = 1 To iColorCount sColorNameItem = ItemExtract (iColor, sColorNameList, @TAB) sRegKeySub = StrCat ("[", sColorNameItem, "]") If RegExistValue (hRegKey, sRegKeySub) sColorValueItem = RegQueryValue (hRegKey, sRegKeySub) sColorValueList = ItemReplace (sColorValueItem, iColor, sColorValueList, @TAB) EndIf Next RegCloseKey (hRegKey) Drop (hRegKey, iColor, iColorCount, sColorNameItem, sColorValueItem) EndIf Drop (sRegKeySub) ;--- Additional colors from my own inspiration. ------------------------------------------------------------------------------------------- ; Note: Force creating new HashTable if colors have changed. sColorNameList = ItemInsert ("Operator", -1, sColorNameList, @TAB) sColorValueList = ItemInsert ("000,048,128", -1, sColorValueList, @TAB) sColorNameList = ItemInsert ("Bracket", -1, sColorNameList, @TAB) sColorValueList = ItemInsert ("032,032,032", -1, sColorValueList, @TAB) sColorNameList = ItemInsert ("Number", -1, sColorNameList, @TAB) sColorValueList = ItemInsert ("096,000,000", -1, sColorValueList, @TAB) sColorNameList = ItemInsert ("Special", -1, sColorNameList, @TAB) sColorValueList = ItemInsert ("000,032,128", -1, sColorValueList, @TAB) ;--- Additional colors from WIL.CLR inifile. ---------------------------------------------------------------------------------------------- ; for example: CON=128,0,128; EXT=255,0,255; CONSTANT=0,128,255; WED=0,128,0; UDF=128,096,048; OPERATOR=0,48,128 sFilenameWilClr = StrCat (DirHome (), "WIL.CLR") sColorList = IniItemizePvt ("COLORS", sFilenameWilClr) iColorCount = ItemCount (sColorList, @TAB) For iColor = 1 To iColorCount sColorNameItem = ItemExtract (iColor, sColorList, @TAB) sColorValueItem = IniReadPvt ("COLORS", sColorNameItem, "000,000,000", sFilenameWilClr) sColorValueList = ItemInsert (sColorValueItem, -1, sColorValueList, @TAB) sColorNameList = ItemInsert (sColorNameItem, -1, sColorNameList, @TAB) Next Drop (iColorCount, sFilenameWilClr, sColorList, sColorNameItem, sColorValueItem, iColor) ;------------------------------------------------------------------------------------------------------------------------------------------ ; Set all items to lower case. ; This is used later when comparing with lowercase keywords in hashbuffer. sColorNameList = StrLower (sColorNameList) ; Delete duplicate names. sNameTrimList = "" sValueTrimList = "" iCount = ItemCount (sColorNameList, @TAB) For iColor = 1 To iCount sNameItem = ItemExtract (iColor, sColorNameList, @TAB) If (sNameItem > "") If !ItemLocate (sNameItem, sNameTrimList, @TAB) sNameTrimList = ItemInsert (sNameItem, -1, sNameTrimList, @TAB) sValueItem = ItemExtract (iColor, sColorValueList, @TAB) sValueTrimList = ItemInsert (sValueItem, -1, sValueTrimList, @TAB) EndIf EndIf Next sColorNameList = sNameTrimList sColorValueList = sValueTrimList Drop (iColor, iCount, sNameItem, sNameTrimList, sValueItem, sValueTrimList) ;------------------------------------------------------------------------------------------------------------------------------------------ If UseRGB ; delete all leading zeroes sColorValueList = ItemInsert ("", 0, sColorValueList, @TAB) sColorValueList = StrReplace (sColorValueList, @TAB, StrCat (",", @TAB, ",")) sColorValueList = StrReplace (sColorValueList, ",0", ",") sColorValueList = StrReplace (sColorValueList, ",0", ",") sColorValueList = StrReplace (sColorValueList, ",,", ",0,") sColorValueList = StrReplace (sColorValueList, ",,", ",0,") sColorValueList = StrReplace (sColorValueList, StrCat (",", @TAB, ","), @TAB) sColorValueList = ItemRemove (1, sColorValueList, @TAB) Else ; convert rgb to hex iColorCount = ItemCount (sColorValueList, @TAB) For iColor = 1 To iColorCount sRgbItem = ItemExtract (iColor, sColorValueList, @TAB) sColorValueItem = StrCat ("#", udfByteToHex (ItemExtract (1, sRgbItem, ","))) sColorValueItem = StrCat (sColorValueItem, udfByteToHex (ItemExtract (2, sRgbItem, ","))) sColorValueItem = StrCat (sColorValueItem, udfByteToHex (ItemExtract (3, sRgbItem, ","))) sColorValueList = ItemReplace (sColorValueItem, iColor, sColorValueList, @TAB) Next EndIf Drop (iColorCount, sColorValueItem, iColor, sRgbItem) Return ;========================================================================================================================================== :CollectKeywords sMsg = "Collecting Keywords ..." udsDisplayMsg (sMsg) ; Read my inifile in WinBatch system folder. sFilenameW2HIni = StrCat (DirHome (), "wbt2html.ini") If !FileExist (sFilenameW2HIni) Then Goto LabelCreateHashTable If (IniReadPvt ("WBT2HTML", "FileVersion", "", sFilenameW2HIni) <> sProgVersion) Then Goto LabelCreateHashTable sFilenameWilClr = IniReadPvt ("WIL", "ColorName", "", sFilenameW2HIni) If (sFilenameWilClr == "") Then Goto LabelCreateHashTable If !FileExist (sFilenameWilClr) Then Goto LabelCreateHashTable If (IniReadPvt ("WIL", "ColorCRC", "", sFilenameW2HIni) <> udfFileCrc32 (sFilenameWilClr)) Then Goto LabelCreateHashTable If !FileExist (IniReadPvt ("WIL", "HashName", "", sFilenameW2HIni)) Then Goto LabelCreateHashTable sMsg = "Reading Keyword HashTable ..." udsDisplayMsg (sMsg) GoSub ReadIni ; Get the hash buffer filename and other definition values. iBBHashSize = FileSizeEx (sFilenameBBHash) If !iBBHashSize Then Goto LabelCreateHashTable hBBHash = BinaryAlloc (iBBHashSize) BinaryRead (hBBHash, sFilenameBBHash) Drop (sFilenameWilClr, iBBHashSize, sFilenameW2HIni) Return ; Create the Binary Buffer HashTable. :LabelCreateHashTable sMsg = "Creating Keyword HashTable ... be patient ..." udsDisplayMsg (sMsg) CurrentDir = DirGet () DirChange (udfGetTempPath ()) sFilenameBBHash = StrCat (udfDirGetLong (), "wil.hsh") DirChange (DirHome ()) sFilenameWilClr = StrCat (udfDirGetLong (), "wil.clr") DirChange (CurrentDir) Drop (CurrentDir) Terminate (!FileExist (sFilenameWilClr), "Error", "WBT2HTML.WBT needs a good WIL.CLR file with some Keywords in it ...") GoSub InitIni GoSub ReadIni ; Read keywords from WIL.CLR inifile and create HashTable. sKeywordList = IniItemizePvt ("KEYWORDS", sFilenameWilClr) iKeywordCount = ItemCount (sKeywordList, @TAB) ; Calculation rule: HashBufferSize = HashLoadFactor*KeyCount*(Length of Key + Length of Data) with HashLoadFactor=140..200Pct. iBBHashSize = udfGetPrimeThisOrNext (Int (@GOLDENRATIO * iKeywordCount)) * iBBHashRecSize ; Try to make the hash more perfect. ; Test.20020823 hBBHash = BinaryAlloc (iBBHashSize) For i = 1 To iKeywordCount sKeywordItem = ItemExtract (i, sKeywordList, @TAB) sColorNameItem = StrTrim (IniReadPvt ("KEYWORDS", sKeywordItem, "", sFilenameWilClr)) If (sColorNameItem == "1") Then sColorNameItem = "Keyword" ; Set standard WIL color=1 to "Keyword" as set in Registry. iBBHashOffset = BinaryHashRec (hBBHash, iBBHashRecSize, iBBHashKeyOffset, iBBHashKeySize, StrLower (sKeywordItem)) BinaryPokeStr (hBBHash, iBBHashOffset + iBBHashColorNameOffset, StrLower (sColorNameItem)) BinaryPokeStr (hBBHash, iBBHashOffset + iBBHashMixCaseOffset, sKeywordItem) Next BinaryWrite (hBBHash, sFilenameBBHash) GoSub WriteIni Drop (sFilenameWilClr, sColorNameItem, iBBHashSize, sFilenameBBHash, iBBHashOffset, i) Drop (iKeywordCount, sKeywordItem, sKeywordList, CurrentDir, sFilenameW2HIni) Return ;------------------------------------------------------------------------------------------------------------------------------------------ :InitIni IniWritePvt ("WBT2HTML", "InternalName", "wbt2html.wbt", sFilenameW2HIni) IniWritePvt ("WBT2HTML", "FileVersion", sProgVersion, sFilenameW2HIni) IniWritePvt ("WBT2HTML", "FileVersionDate", sProgVersionDate, sFilenameW2HIni) IniWritePvt ("WBT2HTML", "FileDescription", "WBT to coloured HTML Script Converter", sFilenameW2HIni) IniWritePvt ("WBT2HTML", "OriginalFilename", "WBT2HTML.WBT", sFilenameW2HIni) IniWritePvt ("WBT2HTML", "ProductName", sProgProduct, sFilenameW2HIni) IniWritePvt ("WBT2HTML", "ProductVersion", "1", sFilenameW2HIni) IniWritePvt ("WBT2HTML", "CompanyName", "Detlev Dalitz", sFilenameW2HIni) IniWritePvt ("WBT2HTML", "LegalCopyright", sProgCopyright, sFilenameW2HIni) IniWritePvt ("WBT2HTML", "Comments", "emailto:dd@dalitz-im-netz.de", sFilenameW2HIni) IniWritePvt ("WBT2HTML", "IniYmdHms", TimeYmdHms (), sFilenameW2HIni) IniWritePvt ("WIL", "ColorName", sFilenameWilClr, sFilenameW2HIni) IniWritePvt ("WIL", "ColorYmdHms", "", sFilenameW2HIni) IniWritePvt ("WIL", "ColorCRC", "0", sFilenameW2HIni) IniWritePvt ("WIL", "ColorMD5", "", sFilenameW2HIni) IniWritePvt ("WIL", "HashName", sFilenameBBHash, sFilenameW2HIni) IniWritePvt ("WIL", "HashYmdHms", "", sFilenameW2HIni) IniWritePvt ("WIL", "HashCRC", "0", sFilenameW2HIni) IniWritePvt ("WIL", "HashMD5", "", sFilenameW2HIni) IniWritePvt ("", "", "", sFilenameW2HIni) ; Flush the buffer to disk. Return ;------------------------------------------------------------------------------------------------------------------------------------------ :WriteIni IniWritePvt ("WIL", "ColorName", sFilenameWilClr, sFilenameW2HIni) IniWritePvt ("WIL", "ColorYmdHms", FileTimeGetEx (sFilenameWilClr, 2), sFilenameW2HIni) IniWritePvt ("WIL", "ColorCRC", udfFileCrc32 (sFilenameWilClr), sFilenameW2HIni) IniWritePvt ("WIL", "ColorMD5", udfFileChecksum (sFilenameWilClr, 0), sFilenameW2HIni) IniWritePvt ("WIL", "HashName", sFilenameBBHash, sFilenameW2HIni) IniWritePvt ("WIL", "HashYmdHms", FileTimeGetEx (sFilenameBBHash, 2), sFilenameW2HIni) IniWritePvt ("WIL", "HashCRC", udfFileCrc32 (sFilenameBBHash), sFilenameW2HIni) IniWritePvt ("WIL", "HashMD5", udfFileChecksum (sFilenameBBHash, 0), sFilenameW2HIni) IniWritePvt ("", "", "", sFilenameW2HIni) ; Flush the buffer to disk. Return ;------------------------------------------------------------------------------------------------------------------------------------------ :ReadIni iBBHashKeyOffset = 0 ; Key lowercase. iBBHashKeySize = 60 ; Key lowercase. iBBHashColorNameOffset = 60 ; Color name. iBBHashColorNameSize = 30 ; Color name. iBBHashMixCaseOffset = 90 ; Key content in mixed case as stored in WIL.CLR. iBBHashMixCaseSize = 30 ; Key content in mixed case as stored in WIL.CLR. iBBHashRecSize = iBBHashKeySize + iBBHashColorNameSize + iBBHashMixCaseSize iBBHashRecSize = (1 + (iBBHashRecSize / 16)) * 16 ; Align RecordSize to 16 Byte boundary. ; Test.20020823 sFilenameBBHash = IniReadPvt ("WIL", "HashName", "", sFilenameW2HIni) Return ; iBBHashKeySize upsized from 30 to 60 chars, regardless of WinBatch's limited var size. ; This is done for runtime security reasons and because of OLE-object names, which are 'oversized' sometimes. ;========================================================================================================================================== :TagQuote sMsg = "Tagging Quotes ..." udsDisplayMsg (sMsg) qlist = """|'|`" ; Three items: doublequote, singlequote, backquote. sCommentChar = ";" sQuoteChars = StrReplace (qlist, "|", "") sScanChars = StrCat (sQuoteChars, sCommentChar) sTagIdent = "q" sTagList%sTagIdent% = sTagOn ; Start list with a well known item. ; Allocate a separate work line buffer, 4 KB should be enough, otherwise enlarge it to your needs. iBBLineSize = 4096 hBBLine = BinaryAlloc (iBBLineSize) sBBTag = BinaryTagInit (hBB, @LF, @CR) While 1 sBBTag = BinaryTagFind (sBBTag) If (sBBTag == "") Then Break sLine = BinaryTagExtr (sBBTag, 1) If (sLine == "") Then Continue sScanLine = StrClean (sLine, sScanChars, "", @TRUE, 2) If (StrLen (sScanLine) < 2) Then Continue ; Skip line, no complete quoted literal to replace. If (StrSub (sScanLine, 1, 1) == sCommentChar) Then Continue ; Skip line, contains comment only. sScanLineQuoteChars = StrClean (sQuoteChars, sScanLine, "", @TRUE, 2) iQuoteCount = StrLen (sScanLineQuoteChars) For iQuote = 1 To iQuoteCount sQuote = StrSub (sScanLineQuoteChars, iQuote, 1) sBBLineTag%iQuote% = BinaryTagInit (hBBLine, sQuote, sQuote) Next sScanLineQuoteChars = StrCat (sScanLineQuoteChars, sCommentChar) ; Find literals. BinaryEodSet (hBBLine, 0) BinaryPokeStr (hBBLine, 0, sLine) iScan = 1 While 1 sScanLine = BinaryPeekStr (hBBLine, 0, BinaryEodGet (hBBLine)) iScan = StrScan (sScanLine, sScanLineQuoteChars, iScan, @FWDSCAN) If !iScan Then Break sChar = StrSub (sScanLine, iScan, 1) If (sChar == sCommentChar) Then Break iQuote = StrIndex (sScanLineQuoteChars, sChar, 1, @FWDSCAN) sBBLineTag = sBBLineTag%iQuote% sBBLineTag = BinaryTagFind (sBBLineTag) If (sBBLineTag == "") Then Break ; If we break here, then there must be a syntax error in input file. sLiteral = BinaryTagExtr (sBBLineTag, 1) ; Exclude current Quote Char from colorizing. ;;; sLiteral = StrCat(sChar,sLiteral,sChar) ; do not (!) include quote chars for later colorizing !!! If UseVerbose sMsgUse = StrCat (sMsg, @LF, "BufferUsage BB ", 100 * BinaryEodGet (hBB) / iBBSize, "%%") sMsgUse = StrCat (sMsgUse, @LF, "BufferUsage BBLine ", 100 * BinaryEodGet (hBBLine) / iBBLineSize, "%%") sMsgUse = StrCat (sMsgUse, @LF, sLiteral) udsDisplayMsg (sMsgUse) EndIf iItemLocate = ItemLocate (sLiteral, sTagList%sTagIdent%, @TAB) If !iItemLocate sTagList%sTagIdent% = ItemInsert (sLiteral, -1, sTagList%sTagIdent%, @TAB) sTag = StrCat (sTagOn, sTagIdent, ItemCount (sTagList%sTagIdent%, @TAB), sTagOff) Else sTag = StrCat (sTagOn, sTagIdent, iItemLocate, sTagOff) EndIf sTag = StrCat (sChar, sTag, sChar) ; Exclude current Quote Char from colorizing. sBBLineTag = BinaryTagRepl (sBBLineTag, sTag) sBBLineTag%iQuote% = sBBLineTag iScan = iScan + StrLen (sTag) EndWhile ; Replace the line. sLine = BinaryPeekStr (hBBLine, 0, BinaryEodGet (hBBLine)) sTag = StrCat (@LF, sLine, @CR) sBBTag = BinaryTagRepl (sBBTag, sTag) EndWhile BinaryFree (hBBLine) Drop (hBBLine) ; --- debug --- ; num = udfItemListToFile (sTagList%sTagIdent%, @tab, StrCat(udfGetTempPath(),"wbt2html.sTagList.",sTagIdent,".txt")) DropWild ("sBBLineTag*") Drop (iBBLineSize, iItemLocate, iQuote, iQuoteCount, iScan, qlist) Drop (sBBTag, sChar, sCommentChar, sLine, sLiteral, sMsg, sMsgUse) Drop (sQuote, sQuoteChars, sScanChars, sScanLine, sScanLineQuoteChars, sTag, sTagIdent) Return ;========================================================================================================================================== :TagComment sMsg = "Tagging Comments ..." udsDisplayMsg (sMsg) clist = ";" sTagIdent = "c" sTagList%sTagIdent% = sTagOn ; Start list with a well known item. ccount = ItemCount (clist, ".") For c = 1 To ccount citem = ItemExtract (c, clist, ".") sBBTag = BinaryTagInit (hBB, citem, @CR) While 1 sBBTag = BinaryTagFind (sBBTag) If (sBBTag == "") Then Break cstr = BinaryTagExtr (sBBTag, 1) cstr = StrCat (citem, cstr) ; Include leading comment char for later colorizing. If UseVerbose sMsgUse = StrCat (sMsg, @LF, "BufferUsage ", 100 * BinaryEodGet (hBB) / iBBSize, "%%", @LF, cstr) udsDisplayMsg (sMsgUse) EndIf iItemLocate = ItemLocate (cstr, sTagList%sTagIdent%, @TAB) If !iItemLocate sTagList%sTagIdent% = ItemInsert (cstr, -1, sTagList%sTagIdent%, @TAB) sTag = StrCat (sTagOn, sTagIdent, ItemCount (sTagList%sTagIdent%, @TAB), sTagOff) Else sTag = StrCat (sTagOn, sTagIdent, iItemLocate, sTagOff) EndIf sTag = StrCat (sTag, @CR) ; Exclude trailing 'comment char' (@CR) from colorizing. sBBTag = BinaryTagRepl (sBBTag, sTag) EndWhile Next ; --- debug --- ; num = udfItemListToFile (sTagList%sTagIdent%, @tab, StrCat(udfGetTempPath(),"wbt2html.sTagList.",sTagIdent,".txt")) Drop (c, ccount, citem, clist, cstr, iItemLocate, sBBTag, sMsg, sMsgUse, sTag, sTagIdent) Return ;========================================================================================================================================== :TagOperatorMod ; This routine needs the round brackets untouched. sMsg = "Tagging Operator mod ..." udsDisplayMsg (sMsg) sTagIdent = "m" sTagList%sTagIdent% = sTagOn ; Start list with a well known item. If (BinaryIndexEx (hBB, 0, "mod", @FWDSCAN, @FALSE) < 0) Then Return ; Nothing to do. No "mod" text fragment found. ; Workaround for the Regular Expression '[ 0-9\)](mod)[ 0-9\(\+\-]' ; KEDIT: change r '[ 0-9\)](mod)[ 0-9\(\+\-]'<font color="#rrggbb">&1</font>' * * ; Build a list of all combinations. sModList = "" sListL = " 0123456789)" sListR = " 0123456789(+-" iMaxL = StrLen (sListL) iMaxR = StrLen (sListR) For iL = 1 To iMaxL For iR = 1 To iMaxR sModList = ItemInsert (StrCat (StrSub (sListL, iL, 1), StrSub (sListR, iR, 1)), -1, sModList, @TAB) Next Next Drop (iL, iR, iMaxL, iMaxR, sListL, sListR) iModReplaced = 0 iModCount = ItemCount (sModList, @TAB) For iMod = 1 To iModCount mstr = ItemExtract (iMod, sModList, @TAB) If UseVerbose mstr = StrCat (StrSub (mstr, 1, 1), "mod", StrSub (mstr, 2, 1)) sMsgUse = StrCat (sMsg, @LF, "BufferUsage ", 100 * BinaryEodGet (hBB) / iBBSize, "%%", @LF, mstr) udsDisplayMsg (sMsgUse) EndIf sBBTag = BinaryTagInit (hBB, StrCat (StrSub (mstr, 1, 1), "mod"), StrSub (mstr, 2, 1)) While 1 sBBTag = BinaryTagFind (sBBTag) If (sBBTag == "") Then Break If BinaryTagLen (sBBTag, 0) Then Continue ; not a pure "mod", e.g. " (mod)ified " mstr = BinaryPeekStr (hBB, BinaryTagIndex (sBBTag, 1), BinaryTagLen (sBBTag, 1)) sTag = StrCat (sTagOn, sTagIdent, 2, sTagOff) sTag = StrReplace (StrLower (mstr), "mod", sTag) sBBTag = BinaryTagRepl (sBBTag, sTag) iModReplaced = 1 EndWhile Next If iModReplaced Then sTagList%sTagIdent% = ItemInsert ("mod", -1, sTagList%sTagIdent%, @TAB) ; The one and only keyword in this list. ; --- debug --- ; num = udfItemListToFile (sTagList%sTagIdent%, @tab, StrCat(udfGetTempPath(),"wbt2html.sTagList.",sTagIdent,".txt")) ; num = BinaryWrite(hBB,StrCat(udfGetTempPath(),"wbt2html.hBB.",sTagIdent,".bin")) Drop (iMod, iModCount, iModReplaced, mstr, sBBTag, sModList, sMsg, sMsgUse, sTag, sTagIdent) Return ;========================================================================================================================================== :TagOperator sMsg = "Tagging Operators ..." udsDisplayMsg (sMsg) olist = "==.<=.>=.<>.!=.<.>.**.*./.+.-.&&.||.<<.>>.&.|.^.~.!.+.-.=" ; plus ".mod" ; binary(relational,arithmetic,logical),unary(integer logical,integer & float),assignment sTagIdent = "o" sTagList%sTagIdent% = sTagOn ; Start list with a well known item. ocount = ItemCount (olist, ".") For o = 1 To ocount ostr = ItemExtract (o, olist, ".") If UseVerbose sMsgUse = StrCat (sMsg, @LF, "BufferUsage ", 100 * BinaryEodGet (hBB) / iBBSize, "%%", @LF, ostr) udsDisplayMsg (sMsgUse) EndIf sTag = StrCat (sTagOn, sTagIdent, 1 + ItemCount (sTagList%sTagIdent%, @TAB), sTagOff) If BinaryReplace (hBB, ostr, sTag, @TRUE) Then sTagList%sTagIdent% = ItemInsert (ostr, -1, sTagList%sTagIdent%, @TAB) Next ; --- debug --- ; num = udfItemListToFile (sTagList%sTagIdent%, @tab, StrCat(udfGetTempPath(),"wbt2html.sTagList.",sTagIdent,".txt")) Drop (o, ocount, olist, ostr, sMsg, sMsgUse, sTag, sTagIdent) Return ;========================================================================================================================================== :TagBracket sMsg = "Tagging Brackets ..." udsDisplayMsg (sMsg) blist = "(.).[.].{.}" ; brackets sTagIdent = "b" sTagList%sTagIdent% = sTagOn ; Start list with a well known item. bcount = ItemCount (blist, ".") For b = 1 To bcount bstr = ItemExtract (b, blist, ".") If UseVerbose sMsgUse = StrCat (sMsg, @LF, "BufferUsage ", 100 * BinaryEodGet (hBB) / iBBSize, "%%", @LF, bstr) udsDisplayMsg (sMsgUse) EndIf sTag = StrCat (sTagOn, sTagIdent, 1 + ItemCount (sTagList%sTagIdent%, @TAB), sTagOff) If BinaryReplace (hBB, bstr, sTag, @TRUE) Then sTagList%sTagIdent% = ItemInsert (bstr, -1, sTagList%sTagIdent%, @TAB) Next ; --- debug --- ; num = udfItemListToFile (sTagList%sTagIdent%, @tab, StrCat(udfGetTempPath(),"wbt2html.sTagList.",sTagIdent,".txt")) Drop (b, bcount, blist, bstr, sTag, sMsg, sMsgUse, sTagIdent) Return ;========================================================================================================================================== :TagSpecial sMsg = "Tagging Special Chars ..." udsDisplayMsg (sMsg) slist = " |,|@|#|::|:" ; Blank,Comma,ASCII-64,ASCII-35,DoubleColon,Colon. (Percent sign too?) sTagIdent = "s" sTagList%sTagIdent% = sTagOn ; Start list with a well known item. scount = ItemCount (slist, "|") For s = 1 To scount sstr = ItemExtract (s, slist, "|") If UseVerbose sMsgUse = StrCat (sMsg, @LF, "BufferUsage ", 100 * BinaryEodGet (hBB) / iBBSize, "%%", @LF, sstr) udsDisplayMsg (sMsgUse) EndIf sTag = StrCat (sTagOn, sTagIdent, 1 + ItemCount (sTagList%sTagIdent%, @TAB), sTagOff) If BinaryReplace (hBB, sstr, sTag, @TRUE) Then sTagList%sTagIdent% = ItemInsert (sstr, -1, sTagList%sTagIdent%, @TAB) Next ; --- debug --- ; num = udfItemListToFile (sTagList%sTagIdent%, @tab, StrCat(udfGetTempPath(),"wbt2html.sTagList.",sTagIdent,".txt")) Drop (sMsg, sMsgUse, s, scount, slist, sstr, sTag, sTagIdent) Return ;========================================================================================================================================== :TagWordNumber sMsg = "Tagging Words and Numbers ..." udsDisplayMsg (sMsg) sTagIdentWord = "w" sTagList%sTagIdentWord% = sTagOn ; Start list with a well known item. sTagIdentNumber = "n" sTagList%sTagIdentNumber% = sTagOn ; Start list with a well known item. ; "hide" all @crlf BinaryReplace (hBB, @CRLF, StrCat (sTagOn, @CRLF, sTagOff), @FALSE) sBBTag = BinaryTagInit (hBB, sTagOff, sTagOn) While 1 sBBTag = BinaryTagFind (sBBTag) If (sBBTag == "") Then Break sWordNumber = BinaryTagExtr (sBBTag, 1) If (sWordNumber == "") Then Continue If UseVerbose sMsgUse = StrCat (sMsg, @LF, "BufferUsage ", 100 * BinaryEodGet (hBB) / iBBSize, "%%", @LF, sWordNumber) udsDisplayMsg (sMsgUse) EndIf If IsNumber (sWordNumber) iItemLocate = ItemLocate (sWordNumber, sTagList%sTagIdentNumber%, @TAB) If !iItemLocate sTagList%sTagIdentNumber% = ItemInsert (sWordNumber, -1, sTagList%sTagIdentNumber%, @TAB) iItemLocate = ItemCount (sTagList%sTagIdentNumber%, @TAB) EndIf sTag = StrCat (sTagOff, sTagOn, sTagIdentNumber, iItemLocate, sTagOff, sTagOn) Else iItemLocate = ItemLocate (sWordNumber, sTagList%sTagIdentWord%, @TAB) If !iItemLocate sTagList%sTagIdentWord% = ItemInsert (sWordNumber, -1, sTagList%sTagIdentWord%, @TAB) iItemLocate = ItemCount (sTagList%sTagIdentWord%, @TAB) EndIf sTag = StrCat (sTagOff, sTagOn, sTagIdentWord, iItemLocate, sTagOff, sTagOn) EndIf sBBTag = BinaryTagRepl (sBBTag, sTag) EndWhile ; "unhide" all @crlf BinaryReplace (hBB, StrCat (sTagOn, @CRLF, sTagOff), @CRLF, @FALSE) ; --- debug --- ; num = udfItemListToFile (sTagList%sTagIdentNumber%, @tab, StrCat(udfGetTempPath(),"wbt2html.sTagList.",sTagIdentNumber,".txt")) ; num = udfItemListToFile (sTagList%sTagIdentWord%, @tab, StrCat(udfGetTempPath(),"wbt2html.sTagList.",sTagIdentWord,".txt")) ; num = BinaryWrite(hBB,StrCat(udfGetTempPath(),"wbt2html.hBB.",sTagIdentWord,".bin")) Drop (iItemLocate, sMsg, sMsgUse, sBBTag, sTagIdentNumber, sTagIdentWord, sWordNumber, sTag) Return ;========================================================================================================================================== :EncodeNamedEntities sMsg = "Encoding HTML Named Entities ..." udsDisplayMsg (sMsg) sTagListo = StrReplace (sTagListo, "&", "&") sTagListo = StrReplace (sTagListo, "<", "<") sTagListo = StrReplace (sTagListo, ">", ">") sTagListc = StrReplace (sTagListc, "&", "&") sTagListc = StrReplace (sTagListc, "<", "<") sTagListc = StrReplace (sTagListc, ">", ">") sTagListq = StrReplace (sTagListq, "&", "&") sTagListq = StrReplace (sTagListq, '"', """) sTagListq = StrReplace (sTagListq, "<", "<") sTagListq = StrReplace (sTagListq, ">", ">") sTagListq = StrReplace (sTagListq, "{", "{") sTagListq = StrReplace (sTagListq, "}", "}") sTagListc = StrReplace (sTagListc, "ä", "ä") sTagListc = StrReplace (sTagListc, "ö", "ö") sTagListc = StrReplace (sTagListc, "ü", "ü") sTagListc = StrReplace (sTagListc, "Ä", "Ä") sTagListc = StrReplace (sTagListc, "Ö", "Ö") sTagListc = StrReplace (sTagListc, "Ü", "Ü") sTagListc = StrReplace (sTagListc, "ß", "ß") sTagListq = StrReplace (sTagListq, "ä", "ä") sTagListq = StrReplace (sTagListq, "ö", "ö") sTagListq = StrReplace (sTagListq, "ü", "ü") sTagListq = StrReplace (sTagListq, "Ä", "Ä") sTagListq = StrReplace (sTagListq, "Ö", "Ö") sTagListq = StrReplace (sTagListq, "Ü", "Ü") sTagListq = StrReplace (sTagListq, "ß", "ß") ; For details see Unicode "ISO 10646" Return ;========================================================================================================================================== :ColorizeWord sTagIdent = "w" If (sTagList%sTagIdent% == sTagOn) ; No words to colorize. Drop (sTagList%sTagIdent%) Drop (sTagIdent) BinaryFree (hBBHash) DropWild ("hBBHash*") DropWild ("iBBHash*") Return EndIf iWordCount = ItemCount (sTagList%sTagIdent%, @TAB) iColorCount = ItemCount (sColorNameList, @TAB) ; fill the lists with well known items sFillItem = StrCat (sTagOn, @TAB) iFillCount = (2 * iWordCount) - 1 For iColor = 1 To iColorCount sTagList%sTagIdent%%iColor% = StrFill (sFillItem, iFillCount) Next Drop (sFillItem, iFillCount) iColorDefault = ItemLocate ("default text", sColorNameList, @TAB) For iWord = 2 To iWordCount sWord = ItemExtract (iWord, sTagList%sTagIdent%, @TAB) iBBHashOffset = BinaryHashRec (hBBHash, iBBHashRecSize, iBBHashKeyOffset, iBBHashKeySize, StrLower (sWord)) sColorName = BinaryPeekStr (hBBHash, iBBHashOffset + iBBHashColorNameOffset, iBBHashColorNameSize) If (sColorName == "") BinaryPoke (hBBHash, iBBHashOffset, 0) ; Housekeeping the HashTable. iColor = iColorDefault Else iColor = ItemLocate (sColorName, sColorNameList, @TAB) If iColor == 0 FileAttrSet (sFilenameBBHash, "rash") FileDelete (sFilenameBBHash) Message ("Error", StrCat ("Color name not found.", @LF, "Maybe hash file is corrupt.", @LF, "Run script again.")) Exit EndIf Select UseCase Case 4 sWord = BinaryPeekStr (hBBHash, iBBHashOffset + iBBHashMixCaseOffset, iBBHashMixCaseSize) Break Case 3 sWord = StrUpper (sWord) Break Case 2 sWord = StrLower (sWord) Break Case 1 ; sWord = sWord ; Freestyle, no change. Break EndSelect EndIf sTagList%sTagIdent%%iColor% = ItemReplace (sWord, iWord, sTagList%sTagIdent%%iColor%, @TAB) Next Drop (sTagList%sTagIdent%, iWordCount, sWord, iWord, sColorName, iBBHashOffset, iColorDefault) BinaryFree (hBBHash) ; Hashbuffer has done his job. DropWild ("hBBHash*") DropWild ("iBBHash*") For iColor = 1 To iColorCount If (StrClean (sTagList%sTagIdent%%iColor%, StrCat (@TAB, sTagOn), "", @TRUE, 1) > "") sColorName = ItemExtract (iColor, sColorNameList, @TAB) sMsg = StrCat ("Colorizing Words (", sColorName, ") ...") GoSub ReplaceColorTag EndIf Drop (sTagList%sTagIdent%%iColor%) Next Drop (iColorCount, sColorName, iColor) Drop (sTagIdent) Return ;========================================================================================================================================== :ColorizeNumber sTagIdent = "n" If (sTagList%sTagIdent% <> sTagOn) sMsg = "Colorizing Numbers ..." sColorName = "Number" GoSub ReplaceColorTag EndIf Drop (sColorName, sTagList%sTagIdent%, sTagIdent) Return ;========================================================================================================================================== :ColorizeSpecial sTagIdent = "s" If (sTagList%sTagIdent% <> sTagOn) sMsg = "Colorizing Special Chars ..." sColorName = "" ; "" or "Special" GoSub ReplaceColorTag EndIf Drop (sColorName, sTagList%sTagIdent%, sTagIdent) Return ;========================================================================================================================================== :ColorizeBracket sTagIdent = "b" If (sTagList%sTagIdent% <> sTagOn) sMsg = "Colorizing Brackets ..." sColorName = "" ; "" or "Bracket" GoSub ReplaceColorTag EndIf Drop (sColorName, sTagList%sTagIdent%, sTagIdent) Return ;========================================================================================================================================== :ColorizeOperator sTagIdent = "o" If (sTagList%sTagIdent% <> sTagOn) sMsg = "Colorizing Operators ..." sColorName = "Operator" GoSub ReplaceColorTag EndIf Drop (sColorName, sTagList%sTagIdent%, sTagIdent) Return ;========================================================================================================================================== :ColorizeOperatorMod sTagIdent = "m" If (sTagList%sTagIdent% <> sTagOn) sMsg = "Colorizing Operator mod ..." sColorName = "Operator" GoSub ReplaceColorTag EndIf Drop (sColorName, sTagList%sTagIdent%, sTagIdent) Return ;========================================================================================================================================== :ColorizeComment sTagIdent = "c" If (sTagList%sTagIdent% <> sTagOn) sMsg = "Colorizing Comments ..." sColorName = "Comment" GoSub ReplaceColorTag EndIf Drop (sColorName, sTagList%sTagIdent%, sTagIdent) Return ;========================================================================================================================================== :ColorizeQuote sTagIdent = "q" If (sTagList%sTagIdent% <> sTagOn) sMsg = "Colorizing Quotes ..." sColorName = "Quote" GoSub ReplaceColorTag EndIf Drop (sColorName, sTagList%sTagIdent%, sTagIdent) Return ;========================================================================================================================================== :ReplaceColorTag ; needs a sTagListx udsDisplayMsg (sMsg) If (sTagIdent <> "w") Then iColor = "" iTagCount = ItemCount (sTagList%sTagIdent%%iColor%, @TAB) For iTag = iTagCount To 1 By -1 If UseVerbose iPercent = 100 - (100 * iTag / iTagCount) If !(iPercent mod 10) udsDisplayMsg (StrCat (sMsg, @LF, "Tags done ", iPercent, "%%", @LF, "BufferUsage ", 100 * BinaryEodGet (hBB) / iBBSize, "%%")) EndIf EndIf If UseAnimation iPercent = 100 - (100 * iTag / iTagCount) iBBEod = BinaryEodGet (hBB) - 1 iBBEodFactor = iBBEod / iTagCount iBBBottom = iBBEodFactor * (iTag - 1) iBBTop = Min (iBBEod - iBBBottom, iBBBottom + iBBEodFactor) ; Important Note: BoxText causes an error 12000 abort if this script has been called via WSPOPUP.MNU ! BoxText (StrCat (sMsg, @LF, "Tags done ", iPercent, "%%", @LF, BinaryPeekStr (hBB, iBBBottom, iBBTop))) EndIf sTag = ItemExtract (iTag, sTagList%sTagIdent%%iColor%, @TAB) ; Skip placeholder. If (sTag == sTagOn) Then Continue ; Empty sTag requires no colorizing. If (sTag == "") BinaryReplace (hBB, StrCat (sTagOn, sTagIdent, iTag, sTagOff), sTag, @FALSE) Continue EndIf ; Create the font color html tag. sColorValue = ItemExtract (ItemLocate (StrLower (sColorName), sColorNameList, @TAB), sColorValueList, @TAB) If (sColorValue > "") sTag = StrReplace (sFontTagDefault, "{{txt}}", sTag) sTag = StrReplace (sTag, "{{col}}", sColorValue) EndIf BinaryReplace (hBB, StrCat (sTagOn, sTagIdent, iTag, sTagOff), sTag, @FALSE) Next Drop (iBBBottom, iBBTop, iBBEod, iBBEodFactor, sTag, iTag, iPercent) Drop (sColorValue, iTagCount) Drop (sTagList%sTagIdent%%iColor%) Return ;========================================================================================================================================== :OpenReadSourceFile sMsg = "Reading source file " sMsg = StrCat (sMsg, @LF, sFilenameSource) udsDisplayMsg (sMsg) iFileSize = FileSizeEx (sFilenameSource) Terminate (!iFileSize, "Error", "Sourcefile has FileSize=0") Exclusive (@OFF) If (iFileSize > 16384) Then Exclusive (@ON) ; Speed up performance on large files. iBBSize = iFileSize * 16 ; Or more ? (changing plain text to html lets grow the file sometimes enormously). iBBSize = Max (16384, iBBSize) ; Minimum 16KB Buffer. hBB = BinaryAlloc (iBBSize) BinaryPokeStr (hBB, 0, @LF) ; A little helper @LF. BinaryPokeStr (hBB, 1, @CRLF) ; A little helper @CRLF. BinaryReadEx (hBB, 3, sFilenameSource, 0, iFileSize) BinaryPokeStr (hBB, BinaryEodGet (hBB), @CRLF) ; A little helper @CRLF. BinaryPokeStr (hBB, BinaryEodGet (hBB), @CR) ; A little helper @CR. BinaryReplace (hBB, @TAB, StrFill (" ", UseTabReplaceSize), @FALSE) ; Clean Tabs. Drop (iFileSize) Return ;========================================================================================================================================== :CalculateDelimiters sMsg = "Calculating delimiters ... be patient ... on file" sMsg = StrCat (sMsg, @LF, sFilenameSource) udsDisplayMsg (sMsg) ; Create a chartable ... sTag = "" For iTag = 1 To 31 sTag = StrCat (sTag, Num2Char (iTag)) Next For iTag = 129 To 255 sTag = StrCat (sTag, Num2Char (iTag)) Next sTag = StrReplace (sTag, @TAB, "") sTag = StrReplace (sTag, @CR, "") sTag = StrReplace (sTag, @LF, "") sTag = StrClean (sTag, BinaryPeekStr (hBB, 0, BinaryEodGet (hBB) - 1), "", @FALSE, 1) ; ... and have used chars deleted. Terminate ((StrLen (sTag) < 2), StrCat (sLogo, "Error"), "This special WBT sourcefile cannot be converted into HTML ('tag chars not available').") sTagOn = StrSub (sTag, 1, 1) sTagOff = StrSub (sTag, 2, 1) Drop (iTag, sTag) Return ;========================================================================================================================================== :WriteCloseTargetFile sMsg = "Writing target file " sMsg = StrCat (sMsg, @LF, sFilenameTarget) udsDisplayMsg (sMsg) ; --- Create HTML page structure with Header and Footer. ; Create comments. ; sHtmTagCommentOpen = '<!-- ' ; The standard HTML comment. sHtmTagCommentOpen = '<! ' ; Tweaked for better use in WinBatch Forum. sHtmTagCommentClose = ' -->' sHtmCommentLogo = StrCat ("[", TimeYmdHms (), "]") sHtmCommentLogo = StrCat (sHtmCommentLogo, " colorized HTML by ", sProgProduct, " v", sProgVersion, " ", sProgCopyright) sHtmCommentLogo = StrCat (sHtmTagCommentOpen, sHtmCommentLogo, sHtmTagCommentClose) sHtmCommentColorList = "" iCount = ItemCount (sColorNameList, @TAB) For i = 1 To iCount sColorNameItem = ItemExtract (i, sColorNameList, @TAB) sColorValueItem = ItemExtract (i, sColorValueList, @TAB) sHtmCommentColorList = ItemInsert (StrCat ('"', sColorNameItem, '"="', sColorValueItem, '"'), -1, sHtmCommentColorList, ";") Next Drop (i, iCount) sHtmCommentColorList = StrCat (sHtmTagCommentOpen, sHtmCommentColorList, sHtmTagCommentClose) ; Set style for fonts. Read font attributes for WIL files from WinBatch Studio Registry. sFontFamily = "Courier New" ; Default. sFontSize = "9" ; Default. sFontWeight = "400" ; Default. sFontStyle = "0" ; Default. sRegKeySub = "Software\Wilson WindowWare\WinBatch Studio\Settings\File types\WIL Files" If RegExistKey (@REGCURRENT, sRegKeySub) hRegKey = RegOpenKeyEx (@REGCURRENT, sRegKeySub, 1, "", "") ; Mode=1=KEY_QUERY_VALUE=Permission to query subkey data ; We only need read access. sRegKeySub = "[Font name]" If RegExistValue (hRegKey, sRegKeySub) Then sFontFamily = RegQueryValue (hRegKey, sRegKeySub) sRegKeySub = "[Font size]" If RegExistValue (hRegKey, sRegKeySub) Then sFontSize = RegQueryValue (hRegKey, sRegKeySub) sRegKeySub = "[Font weight]" If RegExistValue (hRegKey, sRegKeySub) Then sFontWeight = RegQueryValue (hRegKey, sRegKeySub) sRegKeySub = "[Font Italic]" If RegExistValue (hRegKey, sRegKeySub) Then sFontStyle = RegQueryValue (hRegKey, sRegKeySub) RegCloseKey (hRegKey) Drop (hRegKey, sRegKeySub) EndIf sFontStyle = ItemExtract (1 + sFontStyle, "normal,italic", ",") ; Translate number to string. sStyleFont = "font-family:'{{sFontFamily}}'; font-size:{{sFontSize}}pt; font-weight:{{sFontWeight}}; font-style:{{sFontStyle}}; " sStyleFont = StrReplace (sStyleFont, "{{sFontFamily}}", sFontFamily) sStyleFont = StrReplace (sStyleFont, "{{sFontSize}}", sFontSize) sStyleFont = StrReplace (sStyleFont, "{{sFontWeight}}", sFontWeight) sStyleFont = StrReplace (sStyleFont, "{{sFontStyle}}", sFontStyle) DropWild ("sFont*") ; Set style for Foreground, Background, Border, Image. sColorValueFg = StrLower (ItemExtract (ItemLocate (StrLower ("Default Text"), sColorNameList, @TAB), sColorValueList, @TAB)) sColorValueBg = StrLower (ItemExtract (ItemLocate (StrLower ("Background"), sColorNameList, @TAB), sColorValueList, @TAB)) If UseRGB sColorValueFg = StrCat ('rgb(', sColorValueFg, ')') sColorValueBg = StrCat ('rgb(', sColorValueBg, ')') EndIf sStyleColorFg = StrCat ('color:', sColorValueFg, '; ') sStyleColorBg = StrCat ("background-color:", sColorValueBg, "; ") sStyleBorder = "border:1pt solid #dddddd; padding:3pt; width:100%%; " sStyleImageBg = "background-image:url(../images/gif/grid.gif); " ; My background image. ; sStyleImageBg = "" ; Activate this line if no background image to use. ; Create PRE tag. sHtmTagPre = StrCat ('<pre style="', sStyleImageBg, sStyleColorBg, sStyleBorder, sStyleFont, sStyleColorFg, '"') sHtmTagPre = StrCat (sHtmTagPre, ' title="colorized by WBT2HTML">') ; Create Header, Footer. sHtmHeader = StrCat ('<html>', @CRLF, '<body>', @CRLF, sHtmCommentLogo, @CRLF, sHtmCommentColorList, @CRLF, sHtmTagPre, @CRLF) sHtmFooter = StrCat ('</pre>', @CRLF, '</body>', @CRLF, '</html>', @CRLF) ; Write the HTML file. BinaryEodSet (hBB, BinaryEodGet (hBB) - 1) ; Cut little helper @CR. BinaryEodSet (hBB, BinaryEodGet (hBB) - 2) ; Cut little helper @CRLF. If (BinaryPeekStr (hBB, BinaryEodGet (hBB) - 2, 2) <> @CRLF) Then BinaryPokeStr (hBB, BinaryEodGet (hBB), @CRLF) ; Add @CRLF for sure. hBBHelp = BinaryAlloc (1024) BinaryWriteEx (hBBHelp, 0, sFilenameTarget, 0, -1) ; Set new eof marker. BinaryPokeStr (hBBHelp, 0, sHtmHeader) BinaryWriteEx (hBBHelp, 0, sFilenameTarget, 0, BinaryEodGet (hBBHelp)) ; Write Header. BinaryWriteEx (hBB, 3, sFilenameTarget, FileSize (sFilenameTarget), BinaryEodGet (hBB) - 3) ; Write the main buffer, ommit helper @CRLF@CR. BinaryEodSet (hBBHelp, 0) BinaryPokeStr (hBBHelp, 0, sHtmFooter) BinaryWriteEx (hBBHelp, 0, sFilenameTarget, FileSize (sFilenameTarget), BinaryEodGet (hBBHelp)) ; Write Footer. ; Close Buffers. BinaryFree (hBBHelp) BinaryFree (hBB) Drop (hBB, hBBHelp) sMsg = "Ready." udsDisplayMsg (sMsg) TimeDelay (1) If (RtStatus () <> 10) Then BoxShut () DropWild ("sStyle*") DropWild ("sColor*") DropWild ("sHtm*") DropWild ("Use*") Return ;========================================================================================================================================== :ProgInit sProgProduct = "WBT2HTML" sProgVersion = "1.25" sProgVersionDate = "20020825" sProgCopyright = StrCat ("(c)20010729-", sProgVersionDate, " Detlev Dalitz") sLogo = StrCat (sProgProduct, ": ") sLogoLong = StrCat (sProgProduct, " v", sProgVersion, " ", sProgVersionDate, " ", sProgCopyright") If (RtStatus () <> 10) Then BoxOpen (sLogoLong, "Be patient") sMsg = "Initiating ..." udsDisplayMsg (sMsg) If UseRGB sFontTagDefault = '<font color="rgb({{col}})">{{txt}}</font>' Else sFontTagDefault = '<font color="{{col}}">{{txt}}</font>' EndIf If (UseAnimation && (RtStatus () == 10)) Then BoxOpen (sLogoLong, "Be patient, 'animated run' will follow after tagging ...") Return ;========================================================================================================================================== :GetParams Drop (sFilenameSource, sFilenameTarget) If !ItemLocate (StrLower (FileExtension (Param1)), "wbt|web", "|") Message ("Error", "WBT2HTM.WBT needs a *.WBT or *.WEB file as input.") iParamError = 1 Else If IsDefined (Param1) Then sFilenameSource = Param1 If IsDefined (Param2) sFilenameTarget = StrCat (FilePath (Param2), FileRoot (Param2), ".htm") ; Force extension. Else sFilenameTarget = StrCat (FilePath (Param1), FileRoot (Param1), ".", FileExtension (Param1), ".htm") ; Add extension. EndIf iParamError = 0 EndIf Return ;========================================================================================================================================== :AskParams AFN_title = "WBT2HTML: Select WBT or WEB File to convert to HTM" AFN_folder = "W:\WINBATCH\2001\" ; Define your standard folder here. AFN_filetypes = "WIL Files|*.wbt;*.web|HTML Files|*.htm;*.html|All Files|*.*|" AFN_default = "*.wbt;*.web" AFN_flag = 1 ; Open single file. While 1 sFilenameSource = AskFilename (AFN_title, AFN_folder, AFN_filetypes, AFN_default, AFN_flag) AFN_folder = FilePath (sFilenameSource) If !Call (IntControl (1004, 0, 0, 0, 0), '"%sFilenameSource%"') ; Call this script again with quoted filename. sFilenameHtm = StrCat (sFilenameSource, ".htm") If (FileExist (sFilenameHtm)) Then RunZoom ("iexplore.exe", sFilenameHtm) EndIf EndWhile Exit ; todo notes: ; The starting AFN_folder should be added to section UserConfigurableInit, may add to INI file. ; May remember the last working folder in INI file. ; sHtmFile should be identical to sFilenameTarget (may make the same variable) ;========================================================================================================================================== ;========================================================================================================================================== :UserConfigurableInit ;############ user configurable area begin ############### ;------------------------------------------------------------------------------------------------------------------------------------------ ;UseCase=1 ; 1=freestyle ;UseCase=2 ; 2=lowercase ;UseCase=3 ; 3=uppercase UseCase = 4 ; 4=standardcase as defined in WIL.CLR resp. as stored in HashTable ;UseRGB=@TRUE ; activate this line for '<font color="rgb(rrr,ggg,bbb)"></font>' UseRGB = @FALSE ; activate this line for '<font color="#rrggbb"></font>' ;UseVerbose=@TRUE ; more screen Messages UseVerbose = @FALSE ; less screen Messages ;UseAnimation=@TRUE ; If you have time to waste and need some animation ... UseAnimation = @FALSE ;UseAutoDelimiter=@TRUE UseAutoDelimiter = @FALSE ;If you set UseAutoDelimiter=@FALSE then sTagOn and sTagOff must be defined manually!!! ;Otherwise unpredictable results will occur! sTagOn = Num2Char (215) sTagOff = Num2Char (208) UseTabReplaceSize = 3 ; If there exist tabs in the source file then replace it with blanks ;------------------------------------------------------------------------------------------------------------------------------------------ Return ;########################### user configurable area end ################# ;========================================================================================================================================== ;========================================================================================================================================== ; syntax 1 (call by another program or start on the commandline without Parameters): ; WBT2HTML.WBT ; opens an AskFilename dialog ; ; syntax2 (call or start with Parameters): ; WBT2HTML.WBT sFilenameSource [sFilenameTarget] ; ; If sFilenameTarget is omitted then sFilenameSource will be used ; with added extension ".htm" ; ; example1: ; WBT2HTML.WBT mybest.wbt ; will create mybest.wbt.htm ; ; example2: ; WBT2HTML.WBT mybest.wbt mybad.htm ; will create mybad.htm ; ; Good luck! Viel Spass! And happy converting ... ;========================================================================================================================================== ;========================================================================================================================================== ; This was the initial idea and starting point of this program: ; -- mit Quotes, KEDIT change r §((("{[~"]@}")|('{[~']@}')|(`{[~`]@}`)))\c§<_font color="#aaaaaa">&1&2&3<_/font>§ * * -- ; -- ohne Quotes, KEDIT change r §((({"}{[~"]@}{"})|({'}{[~']@}{'})|({`}{[~`]@}{`})))\c§<_font color="#aaaaaa">&2&5&8<_/font>§ * * -- ;========================================================================================================================================== ;========================================================================================================================================== ; Note: ; - wbt2html creates an ini file "wbt2html.ini" in winbatch system folder ; - creates a hash file "WIL.HSH" in temp folder ; - needs WIL's serial extender "wwser34i.dll" ; - html output is placed in source folder. ;========================================================================================================================================== ;========================================================================================================================================== ; Note: ; Although it is possible to call the WBT2HTML.wbt script via WSPOPUP.MNU entry, ; the script would not run successfully if UseAnimation is set @TRUE. ; The 'Animation' uses the normal BoxText statement, but this is ; NOT allowed to be used from within the WSPOPUP.MNU environment. ; The script will abort with error number 12000. ; ; Workaround: ; Choice 1. Always do set 'UseAnimation=@FALSE' if calling the script via WSPOPUP.MNU. ; Choice 2. 'Run' the WBT2HTML.WBT via WSPOPUP.MNU entry. ; Choice 3. 'Run' or 'Runwait' the WBT2HTML.WBT via a helper wbt script which is called from WSPOPUP.MNU entry. ; Choice 3 allows to select text passages from current edit text and send it via ClipGet to WBT2HMTL.WBT. ; Those caller script can be something like the following script 'WBStudioToWBT2HTML.wbt'. ;========================================================================================================================================== ;========================================================================================================================================== ; Known Issues: ; None. ;========================================================================================================================================== ;========================================================================================================================================== ; WBStudioToWBT2HTML.wbt ;========================================================================================================================================== ; Caller utility for WBT2HTML.WBT. ; This script should only be called from a WSPOPUP.MNU menu entry from within WinBatch Studio. ; It directs the selected edit text via Clipboard and external tempfile to the WBT2HTML.WBT. ; After returning from WBT2HTML transformation it puts the html output data to Clipboard for following pasting elsewhere. ;------------------------------------------------------------------------------------------------------------------------------------------ ; Call this cript from WSPOPUP.MNU, for example: ; ; WBT2HTML via ClipBoard ; call("W:\WINBATCH\Scripts\WBStudioToWBT2HTML.wbt","") ; ;------------------------------------------------------------------------------------------------------------------------------------------ ; Detlev Dalitz.20011113.20020808 ;------------------------------------------------------------------------------------------------------------------------------------------ InStudio = (RtStatus () == 10) If !InStudio Then Exit If InStudio If !wGetSelState () Then wSelectAll () wCopy () EndIf wClearSel () iBBSize = BinaryClipGet (0, 1) If !iBBSize Then Return ; nothing to do hBB = BinaryAlloc (iBBSize) num = BinaryClipGet (hBB, 1) Display (2, "WBT2HTML", "Selected Text copied to ClipBoard, %num% Byte to format ...") tempfile = FileCreateTemp ("TMP") tempfile = FileLocate (tempfile) wbtfile = StrCat (tempfile, ".wbt") htmfile = StrCat (tempfile, ".htm") FileRename (tempfile, wbtfile) num = BinaryWrite (hBB, wbtfile) BinaryFree (hBB) WILBatchfile = '"W:\WINBATCH\Scripts\WBT2HTML.WBT"' ; Change the path to your needs. RunWait (StrCat (DirHome (), "WinBatch.exe"), StrCat (WILBatchfile, " ", wbtfile, " ", htmfile)) If FileExist (htmfile) iBBSize = FileSize (htmfile) hBB = BinaryAlloc (iBBSize) num = BinaryRead (hBB, htmfile) num = BinaryClipPut (hBB, 1) num = BinaryClipGet (0, 1) BinaryFree (hBB) Display (2, "WBT2HTML", "HTML copied to ClipBoard, %num% Byte to paste ...") EndIf :CANCEL FileDelete (htmfile) FileDelete (wbtfile) Drop (hBB, iBBSize, htmfile, InStudio, num, tempfile, wbtfile, WILBatchfile) Exit ;==========================================================================================================================================